Still thinking about an RV-14

Depending on your hangar. Build a mezzanine. Would there be enough space above the tail to build a mezzanine to store completed parts?
That or build a rack. With the RV-10 I built a roll-around rack that held the wings, the wingtips (finished, cleco'd in place), the flaps (attached), the ailerons (attached), and the HS, with elevators attached. The whole thing was about 6' wide, 6' tall, and 14(ish) feet long. I left the VS and rudder attached to the fuselage to keep them out of the way. You have to fab a splice plate (10 minute job) to mount the vertical stab without the horizontal in place.

Pic below is without elevators, but you get the idea.
 

Attachments

  • IMG_3004.JPG
    IMG_3004.JPG
    51.1 KB · Views: 12
Last edited:
Back
Top