Maui Cirrus CFII
Ejection Handle Pulled
a fun one
Was the Carrier buried under the runway you landed on?
Next up -- Landing a Cirrus on Mars! (mostly you'll need the AoA to increase your endurance, right?)
It only measures pressure difference in the airflow. It's on the left wing and near the outboard, the preferred location. Therefore it won't tell you if you are coordinated. It just tells you how much lift you have left.
My wife gets testy when I start making cracks about the centerline being out of service during her landings.Guess carriers don't have center lines.
Your pilot in the video made a few errors in describing the pattern. I don't really get worked up over who posts what where because I'm not obligated to click on anything. I am also an advocate of flying AOA. But, your posts here are fairly annoying and misleading. I'm not sure where he gets the 4 seconds of separation between aircraft, that doesn't really ring a bell for me. Maybe I misunderstood him though. The downwind altitude is 600ft, not 800. And, it isn't quite accurate to say that Navy pilots only fly AOA. Certainly, it is primary and an essential part of landing on the carrier. But it is wrong to promote the idea of GA pilots only flying AOA and saying that this is what the Navy pilots do landing on the carrier.The funny thing is that he just retired after 34 years at Southwest and he told me that to maintain centerline on a 737, he has to land slightly to the left of center from his seat.
My wife gets testy when I start making cracks about the centerline being out of service during her landings.
Very interesting. In his defense, I think he was talking in simple terms for GA pilots, not high performance jets... But thank you, very insightful.
-- LOLULIM-IC PNUAR EGTL
Nauga,
who paints what he sees
Haha...I remember when that was called "Intruder DLC"I'm personally a fan of mild "hornet DLC".
You are correct, sir.In a more convoluted way, that is what "magic carpet" is doing with the flight control surfaces and FBW inputs if I understand the implementation correctly
Guys also "influence the nose" with fwd/aft stick motion more than Paddles or the LSO school will admit to……in other words the black and white axiom of power=glideslope, pitch=airspeed isn't so black and white. I'm personally a fan of mild "hornet DLC". If you are a little high in close, hold the power (eliminates spool up delay from the motors) where it is and waggle the wings to kill lift. You have to be careful, but it is a good fix for working down a high ball if you know what you are doing. Other jets (think F-4, RA-5C, F-14, S-3, maybe others) had actual DLC which had the same effect, though more controlled. In a more convoluted way, that is what "magic carpet" is doing with the flight control surfaces and FBW inputs if I understand the implementation correctly (have yet to fly with it).
The 4 second interval probably comes from the standard shore based 4 second break (though there are many different "standard" field overheads). At the ship, I'll break as a guy is just a little behind the left wingtip. If I'm following something slower, i.e. a Super Hornet, I'll error a little more towards the leading edge of the left stabilator.
And this caused coffee to be shot out of my nose. About the time I got myself together I scroll down and see the cirrus floating down under chute towards the carrier.Was the Carrier buried under the runway you landed on?
Next up -- Landing a Cirrus on Mars! (mostly you'll need the AoA to increase your endurance, right?)
Is the Super just slower in the landing config or cruise speed as well? I was thinking the Super with more thrust and variable intakes was suppose to make it faster than the Legacy. Larger profile drag overcome those changes?
Turkey is my least favorite. You should be banned.How is this spam? I like the turkey flavor.
It only measures pressure difference in the airflow. It's on the left wing and near the outboard, the preferred location. Therefore it won't tell you if you are coordinated. It just tells you how much lift you have left.
Technically you would be correct. It would have to be a pretty heavy slip though. That is why jets have them on both sides.
You don't do a whole lot of slipping in jets...Technically you would be correct. It would have to be a pretty heavy slip though. That is why jets have them on both sides.
Here ya go http://www.iflyaoa.com/pilot-resources.htmlIs there a link to get the operating manual online?
That was poor English on my part. What I should have said was jets have them on both sides to negate any relative wind effect.You don't do a whole lot of slipping in jets...
Ha! My dermatologist said I need to wear them as it blocks UVA. The windscreen blocks UVB and I'm up there 60-80 hours per month. It actually has helped a lot even though I get a lot of snarky comments.
Some of my colleagues have had to dig equipment out of the snow on Hawaii. There are some real altitudes there.I have to ask. What's up with the fingerless gloves? I've flown in Hawaii and I don't recall ever being cold.
I didn't watch the videos but I think the T-38s touch down 10-25kts below donut speed. Landing at donut speed would eat up a lot of runway as well. Navy jets and the C-17 land on-speed, I don't know of anyone else who does that though there may be some others.Random videos. I learned something from the T-38 vid though. Do not fly optimum approach AOA all the way to the ground. You'll crush your gear.
What is the speed of on unglazed donut?I didn't watch the videos but I think the T-38s touch down 10-25kts below donut speed. Landing at donut speed would eat up a lot of runway as well. Navy jets and the C-17 land on-speed, I don't know of anyone else who does that though there may be some others.