Sinistar
En-Route
- Joined
- Sep 9, 2016
- Messages
- 3,734
- Display Name
Display name:
Brad
There is one Dakota/Pathfinder in our hangar block. At almost 80yrs old he will normally use a small engine tug. But I have seen him move it on totally level surface by himself when its a simple move and not too far like pushing it out of the way after fueling up.I just moved "indoors" to a T-hangar at Albany International Airport - I was formerly a tie-down tenant in the same area. We just parked the plane in our new hangar for the first time, and it was a lot more difficult than I expected to push it backwards into the hanger (as a single person). I have a Piper Dakota, and "as parked" probably weighs about 2,300 lbs right now. I used to pull up in front of my tie-down spot and then push it directly backwards into position without a whole lot of problem. I think there is a slight drainage grade in front of the T-hangar, and that seems to have made a big difference! I got it into the hangar eventually, but I used pretty much my whole strength to push it backwards. Here's the question - I've never owned a "tug" before (since I didn't need one or have a place to put one), but I think it might be necessary in this case. Any suggestions? The first thing I did was to pump up my tires to their pressure specifications, and I think that might help a bit. What do others do in this situation?
Our 182 weighs about the same and I can push and pull it with full fuel (78gals) as long as its level. My wife has troubles so I watched Craigslist for about a 6 months and found a small gas engine tug. I wanted a gas engine because I know that a battery will freeze up or fail on me over the -30F part of the winter. As long as we are flying normally the tug gets started at least twice a month so the carb doesn't get all gummed up.
One note on lawn tractors....they are great for pulling...but you better get your inner farmer on to be able to successfully push a plane back in. Its basically the hay wagon problem. So we use our old JD for pulling it out if its too icy for the hand tug and to pull it over to the pumps to fuel it up and save on the airplane starter. It also has a blade on it so its used to blade away the snowplow leftover pile from the front of the hangar. I found the JD LX288aws with the blade and tire chains for $300 so its probably less than a airplane starter and has been great for the winters.
I see the small battery powered tugs that almost look like a weedeater....if they were just cheaper. And if you can recharge the battery at home it won't freeze. Plus you could probably put it into the plane and have it with you when you land someplace else.
Good tugs aren't cheap.
I've seen some pretty cool DIY ones made from old walk behind snowblowers if you're into making your own.