luvflyin
Touchdown! Greaser!
Gotcha. That's been verified here. The 'Print" thing didn't make sense to me at first. I have been edumicated. No tuition needed. Thanks for bringing it up
the "not worthy of it's own thread" thread
- Thread starter eman1200
- Start date
- Joined
- Oct 16, 2019
- Messages
- 6,166
- Location
- Atlanta / Marietta
- Display Name
Display name:
Vintage Snazzy (so my adult children say)
Anyone remember print to fax?
The best way to find hardware is to go get a new one. When you get back with it you'll immediately find the one you dropped.
DaleB
Final Approach
I am convinced that some parts, and the occasional tool, sublimate when they hit the floor.
Daleandee
Final Approach
- Joined
- Mar 4, 2020
- Messages
- 6,878
- Display Name
Display name:
Dale Andee
- Joined
- Mar 15, 2016
- Messages
- 4,901
- Display Name
Display name:
Ari
I dropped my 1/4” ratchet with an 11mm socket on it into the top side of the engine in a Jeep Liberty a couple years ago. The ratchet made it out, landing almost instantaneously on the floor. The socket was never seen again.
DaleB
Final Approach
We found some schmutz in one carb jet and cleaned ‘em both. Did a couple of run-ups, everything perfect. Did a high speed run on the runway, everything was perfect. Taxi back, another couple run-ups, everything perfect. Took off, everything was perfect. Right up until about 500 AGL, when the pucker factor increased as the square of the sim of the changes in engine RPM and airspeed.
Not doing this again until we can reproduce the issue on the ground and determine with certainty the exact cause and guarantee it’s fixed. On the bright side, I got my cardio workout today while sitting down, so there’s that.
"We don't need to print the Internet.""Microsoft Print to PDF"
Why the heck haven't I been using this all along instead of printing docs and then scanning them to email?
- Joined
- Mar 10, 2013
- Messages
- 19,562
- Location
- Oakland, CA
- Display Name
Display name:
Bro do you even lift
DaleB
Final Approach
No, we’re riveted. Do tell.
- Joined
- Mar 10, 2013
- Messages
- 19,562
- Location
- Oakland, CA
- Display Name
Display name:
Bro do you even lift
Notifications haven’t been working in tapatalk. This is the first one I’ve received in a while, as they think they have the issue fixed. It didn’t affect everyone but I’m hoping it’s finally fixed.
- Joined
- Mar 10, 2013
- Messages
- 19,562
- Location
- Oakland, CA
- Display Name
Display name:
Bro do you even lift
DaleB
Final Approach
Nope. I mean, I have, and I would if it’s all there was, but I’d wear a hat and sunglasses and hope nobody saw me.Well, u probably fly a high wing too….
And I’d give a fake name.
kaiser
Pattern Altitude
- Joined
- Mar 6, 2019
- Messages
- 2,441
- Location
- Chicagoland
- Display Name
Display name:
The pilot formerly known as Cool Beard Guy
Hope y’all are ok.First time I’ve ever had a TFR over my house. Wish it were a VIP one but tragedy instead.
masloki
Pattern Altitude
- Joined
- Aug 23, 2011
- Messages
- 2,136
- Display Name
Display name:
Nunya
So far so good with friends and family, especially the one that lives within a block and was there.
Tarheelpilot
Final Approach
- Joined
- Dec 5, 2010
- Messages
- 7,506
- Location
- North Carolina once again.
- Display Name
Display name:
Tarheelpilot
Is Tapatalk that annoying pop up that keeps asking me to install it?
Charlie Golf
En-Route
- Joined
- Sep 6, 2020
- Messages
- 3,597
- Location
- 1980s
- Display Name
Display name:
Yes, my name is Charlie.
I just had my weekly missed declined call from NYC and the subsequent long voice mail in Chinese.
kaiser
Pattern Altitude
- Joined
- Mar 6, 2019
- Messages
- 2,441
- Location
- Chicagoland
- Display Name
Display name:
The pilot formerly known as Cool Beard Guy
You guys only get those weekly?
Just booked my medical re-up and get to navigate medxpress now. Should I do my 1st class and plan a career change? (not sure if this violates the rule of it not being worthy of its own thread)
- Joined
- Mar 10, 2013
- Messages
- 19,562
- Location
- Oakland, CA
- Display Name
Display name:
Bro do you even lift
do u have your multi yet?
luvflyin
Touchdown! Greaser!
Is that a Beech Starship? Or that other one that looks like it? Can't remember the name.
EDIT: It's a Starship. The other one is a Piaggio Avanti
DaleB
Final Approach
Piaggio Avanti.
- Joined
- Mar 10, 2013
- Messages
- 19,562
- Location
- Oakland, CA
- Display Name
Display name:
Bro do you even lift
Yes it's a starship.
You're thinking of the other twin turboprop pusher... the piaggio p180 avanti, which is cool, but not rare enough to get excited about. They show up at cmi a few times a year, but I've never seen a starship in real life.
kaiser
Pattern Altitude
- Joined
- Mar 6, 2019
- Messages
- 2,441
- Location
- Chicagoland
- Display Name
Display name:
The pilot formerly known as Cool Beard Guy
It's next. Probably start this month if not early next month.
luvflyin
Touchdown! Greaser!
Last I read there were just 3 of them I think. And one guy had a couple of them maybe.
luvflyin
Touchdown! Greaser!
Parked where it belongs. In the back row.
DaleB
Final Approach
The Starship is cooler, in my humble opinion. The P180 doesn't have the swept wing, the Starship is just a thing of beauty.
Possibly the most beautiful aircraft ever built. Easily in the top five.
The piaggio is cool, but I wouldn't call it beautiful. It's cool in it's efficiency and weirdness.
- Joined
- Mar 10, 2013
- Messages
- 19,562
- Location
- Oakland, CA
- Display Name
Display name:
Bro do you even lift
I think the pic is upside down and it's actually in the front row. that's what I'm goin with....
Zeldman
Touchdown! Greaser!
This river runs through Gallup, NM.
Yes, translates to pig river.
No fishing allowed...
A bit disappointed it isn't Puerco Rio instead.
This river runs through Gallup, NM.
Yes, translates to pig river.
No fishing allowed...
If fishing were allowed, what would you use as bait?
Zeldman
Touchdown! Greaser!
All of the signs I have seen have Rio Puerco. I don't know why but for some reason this one is different.
Swimming is not allowed either, probably because of the uranium run off during monsoon season.
Bait.... wait for it.... sandfly....
Swimming is not allowed either, probably because of the uranium run off during monsoon season.
Bait.... wait for it.... sandfly....
Timbeck2
Final Approach
I've found that if I'm looking for something else, I find what I lost; That goes for tools and dropped objects. The only problem is that you have to continue to lose and drop things.
- Joined
- Jun 7, 2008
- Messages
- 23,962
- Display Name
Display name:
Bob Noel
corollary: if you ordered a replacement for a lost <whatever>, then you find the lost item. (just happened to me)
(but, you can't order the item hoping to find it... you can't invoke the corollary to achieve the desired result)