SCAT Tube Sizes

SoCal 182 Driver

Cleared for Takeoff
Joined
Sep 11, 2019
Messages
1,072
Display Name

Display name:
SoCal 182 Driver
Friends -

Can anyone "translate" these part numbers from my Cessna IPC and tell me what size SCAT tubing I need to replace both parts?

S1093E16T (24" long)
S1033K24T (16" long)

Thanks!
 
Can anyone "translate" these part numbers from my Cessna IPC and tell me what size SCAT tubing I need to replace both parts?
Outside of the "S" meaning a standard part, I've never seen a Cessna cross-reference chart. I've always just pulled the duct and measured. Just be sure it is SCAT tubing and not SCEET tubing as there is a difference. If you want a clean look you can use these guys at Custom Aircraft Ducts.
 
Friends -

Can anyone "translate" these part numbers from my Cessna IPC and tell me what size SCAT tubing I need to replace both parts?

S1093E16T (24" long)
S1033K24T (16" long)

Thanks!

You have the part numbers and associated lengths reversed. They're both 3" diameter.
 
You have the part numbers and associated lengths reversed. They're both 3" diameter.

I've been doing more research and seeking advice since my original post. Here's the IPC showing the part numbers.

scat tubing IPC page.png

Here's the bulk items listing from the IPC.

scat tubing bulk page.png
My read is that one is 2" (24" long) and the other is 3" (16" long). Am I reading these wrong?
 
I've been doing more research and seeking advice since my original post. Here's the IPC showing the part numbers.

View attachment 112384

Here's the bulk items listing from the IPC.

View attachment 112385
My read is that one is 2" (24" long) and the other is 3" (16" long). Am I reading these wrong?

No, you're correct. I made a memory post, which shows how much I should depend on my remaining brainpower.
 
Back
Top