There’s a whole slew of info on this one coming out. Apparently a few days before the crash the plane had an engine out on climb out where the pilot landed it back on the runway. The left seat pilot was a 1/4th owner of the plane and was trying to trouble shoot it. No joke he asked someone to stand at the end of the runway and film the plane so his mechanic could see what it does and when it does it (meaning the engine failing). Crazy right? So we probably will see some kind of video of this crash eventually. I have a friend that trained with the CFI in the left seat. They did two lessons and my buddy decided to get another CFI as this one was really unorthodox. Kind of a cowboy.
Sent from my iPad using Tapatalk Pro
And yet we occasionally see a post from someone encountering engine issues every time they fly. They ask us what it might be. The wiser ones among us advise them to stop flying it and find a competent mechanic. Some others, not so wise, make suggestions on what to try on the next flight.Taking off with a known sick engine, to trouble shoot the engine problem in the air, is a concept that just plumb evades me.
And yet we occasionally see a post from someone encountering engine issues every time they fly. They ask us what it might be. The wiser ones among us advise them to stop flying it and find a competent mechanic. Some others, not so wise, make suggestions on what to try on the next flight.
And guess what, just today I was in a rented plane and during the runup the engine was incredibly rough on the left magneto. I went back and an instructor told me he would have a ride to fix the issue. Believe it or not, he confirmed the issue with the left magneto and took off with another instructor to troubleshoot it in the air. They came back after a pattern, declaring the airplane grounded. Very clever way of reaching that conclusion.Taking off with a known sick engine, to trouble shoot the engine problem in the air, is a concept that just plumb evades me.
Sometimes you have to. I had a problem with an intermittently misfiring engine, it only happened at cruise power or above and only after 15 minutes or so of flying. I suspected an ignition issue (single ignition on this engine) and it seemed to be temperature related, so I flew it with a temperature probe taped to the side of the magneto. I took off with a cool engine, climbed and circled above the airport until it happened, sure enough, it consistently happened when the mag temperature reached a certain point. Turned out to be a bad coil.I was taught to never take off with a known engine problem
If true, that is 100% ridiculous.
Or, you can do as we used to do: replace the mags and see if it made any difference.Sometimes you have to. I had a problem with an intermittently misfiring engine, it only happened at cruise power or above and only after 15 minutes or so of flying. I suspected an ignition issue (single ignition on this engine) and it seemed to be temperature related, so I flew it with a temperature probe taped to the side of the magneto. I took off with a cool engine, climbed and circled above the airport until it happened, sure enough, it consistently happened when the mag temperature reached a certain point. Turned out to be a bad coil.
Or take the mag to someone that overhauls them and has a test stand, and ask them to run it and heat it with a heat gun and see if, and at what temp, it starts misfiring. I've done that with suspect sparkplugs.Or, you can do as we used to do: replace the mags and see if it made any difference.
By the way, two instructors taking off with a known ailing engine makes me think that they would have done a pre-takeoff brief on engine failure scenarios. They would have, wouldn't they?
I think we (me included) are missing a key point in this crash sequence: Loss of control. It makes me wonder what these "Instructors" taught their students to do if an engine fails on take off. No matter what the options may be, the most important thing is to maintain control of the aircraft by establishing and maintaining sufficient airspeed. These guys apparently did not do that. Two instructors aboard, even though one is checking the other out in the aircraft (who's PIC?), means that CRM becomes very important (my opinion). "Turn back!" "No, straight ahead!" "Airspeed!". Believe me, I'm not making light of the situation, I'm just trying to understand why this happened, when they probably would have survived a straight ahead, controlled descent into terrain.
By the way, two instructors taking off with a known ailing engine makes me think that they would have done a pre-takeoff brief on engine failure scenarios. They would have, wouldn't they?
My Warrior is down for something like this…seemed to have a fouled plug…cleaned and took it on a short flight and it was okay…the problem came back on a slightly longer flight…both mags pulled and rebuilt and back on tomorrow along with new plugs…diagnostic in the air by a CFI is just stupid in a single engine piston…and I spent almost 20 years as an Army Maintenance Test Pilot…
At least he has the option of an autorotation vs the temptation of the impossible turn.If you did maintenance test flights in helicopters that is really nuts.
At least he has the option of an autorotation vs the temptation of the impossible turn.
Yeah, I used to get that from a glider student until we had to initiate a 360-degree turn at less than 200 feet over the end of the runway because we were too high to land. Amazing how stupid a young instructor can be.Altitude is your friend ...
Yeah, I used to get that from a glider student until we had to initiate a 360-degree turn at less than 200 feet over the end of the runway because we were too high to land. Amazing how stupid a young instructor can be.
Amazing the speed with which you can make those critical adjustments once you actually decide to land off-airport, isn’t it?Had an engine quit on take-off many years ago. Didn't have a lot of altitude or runway so a hard slip put it in a field at at the end of the airport property.
Amazing the speed with which you can make those critical adjustments once you actually decide to land off-airport, isn’t it?
Granted. But the good thing with rotorcraft is that airspeed can negate the lack of altitude if you lose an engine. In general, if you keep your airspeed within the height/velocity clear zone during takeoff, the odds of a successful auto remain high regardless of altutide. Airplanes are a bit lacking in that department hence the "impossible turn" reference.Altitude is your friend ...
It’s hard to do what you know is right when the view out the windshield is that scary.Yes sir. Wasn't a lot of time or choices to be made. My instructor taught me that one of the hardest things I would ever do is look at the ground rushing up and push the stick forward.
Granted. But the good thing with rotorcraft is that airspeed can negate the lack of altitude if you lose an engine. In general, if you keep your airspeed within the height/velocity clear zone during takeoff, the odds of a successful auto remain high regardless of altutide. Airplanes are a bit lacking in that department hence the "impossible turn" reference.
It’s hard to do what you know is right when the view out the windshield is that scary.
BTDT, hard slip to a very fast wheel landing. It's one reason I like planes with a powerful rudder, "we don't need no stinkin' flaps!"Had an engine quit on take-off many years ago. Didn't have a lot of altitude or runway so a hard slip put it in a field at at the end of the airport property. In that situation I can burn altitude but had no way to gain it ...
…and without a nose wheel to make the fast landing difficult.BTDT, hard slip to a very fast wheel landing. It's one reason I like planes with a powerful rudder,