WannFly
Final Approach
"Turn heading 020" is definitely confusing for an aircraft that is taxiing. It was not even close to the direction he was taxiing.
Refer to post 9
"Turn heading 020" is definitely confusing for an aircraft that is taxiing. It was not even close to the direction he was taxiing.
And half the rest of the threadRefer to post 9
HE.
WASN'T.
TAXIING.
Do people not read?!?!?!?
So the video narration and graphic must be way off. It would have been less confusing without the video.
Sure, whenever the controller gives you a turn to a heading while you are taxiing.So I'm confused:
Can we take off inside Bravo without a clearance now, or...?
HE.
WASN'T.
TAXIING.
Do people not read?!?!?!?
This is POA
Listening again, at about 2:00 the pilot confirms this: “Did you get a takeoff clearance?” - “uh - I thought when she said ‘no delay’…” - “Yeah - that was for crossing 8L”Yeah, the 2nd controller input cited above gives a very different picture than how the video was edited.
The 8L controller said "cross 8L, hold short 8R, no delay" but he read back "cross 8L, 8R no delay". Seems to me he missed the "hold short" and thought he was supposed to take off 8R no delay. If anything, maybe the 8L controller's phrasing would have been better as "cross 8L no delay, hold short 8R". Or at least she could have come back with "confirm hold short 8R".
I don't know about this. In the past week I have flown my homebuilt aircraft thru three Bravos - Phoenix, Houston and New Orleans. In each case I told them I was unfamiliar with the area on initial call up. In all cases the controllers went out of their way to help me. They gave me vectors when I asked and even spoke slower to make sure I understood the instructions. I really appreciated the way they helped me.Yikes... I’d imagine it’s situations like these that make Bravo airports less willing to accommodate us little guys.
I don't know about this. In the past week I have flown my homebuilt aircraft thru three Bravos - Phoenix, Houston and New Orleans. In each case I told them I was unfamiliar with the area on initial call up. In all cases the controllers went out of their way to help me. They gave me vectors when I asked and even spoke slower to make sure I understood the instructions. I really appreciated the way they helped me.
I guess it depends on the specific controller but I got a series of good ones, that's for sure.
Listening again, at about 2:00 the pilot confirms this: “Did you get a takeoff clearance?” - “uh - I thought when she said ‘no delay’…” - “Yeah - that was for crossing 8L”
That's an interesting excuse he came up with. The only thing that means cleared for takeoff is "cleared for takeoff". And a double yellow is a taxiway edge marking. Dunno why some pilots have such trouble with basics.
The pilot did not sound task saturated. And there didn't sound like there was enough going on to be saturated about, But if so, task saturation on the ground when you can simply stop wouldn't seem to bode well for success in the air,Easy, task saturation. Under stress your mind isn't able to comprehend and manage all the information coming at it. First word in human error is human.
The pilot did not sound task saturated. And there didn't sound like there was enough going on to be saturated about, But if so, task saturation on the ground when you can simply stop wouldn't seem to bode well for success in the air,
Maybe I need to listen to the unedited audio.
I guess we disagree. As far as I can tell these were simple instructions. The pilot and the first controller both made a mistake. The pilot didn't read back the instruction to hold short of 8R and the controller did not catch the failure to read back the hold short.Being at a Class B airport can be stressful enough, especially if you've never done it before. Other traffic, other ATC chatter that may not be on the YouTube video. Multiple frequency changes. Very easy to get task saturated.
I guess we disagree. As far as I can tell these were simple instructions. The pilot and the first controller both made a mistake. The pilot didn't read back the instruction to hold short of 8R and the controller did not catch the failure to read back the hold short.
I can think of a number of reasons for the pilot's innocent error. Perhaps he simply misheard it. Or perhaps had never been to an airport with parallel runways where he was told to cross one and hold short of another (I've gotten instructions like that at Class C and even D) and unfamiliarity can lead to confusion. And maybe even the stress of being at a class B if it were the first time. Plenty of possible reasons for the error. But, sorry, no. Maybe all we are disagreeing on is definitions, but I don't buy a pilot who has been through the pace of instrument training being "task saturated" by an instruction taxi via the parallel taxiway and hold short (an instruction basic to the smallest towered airports, followed by "cross 8L without delay. Hold short of 8R."
So I'm confused:
Can we take off inside Bravo without a clearance now, or...?
I am more surprised to hear a GA plane taking off at Hartsfield. Was it like 3am or something? Must have been dead there.