SoCal RV Flyer
En-Route
- Joined
- Apr 27, 2016
- Messages
- 3,037
- Display Name
Display name:
SoCal RV Flyer
Despite threats of a storm earlier today, tonight it was perfectly clear, calm and ceilings at about 6500', so I jumped in the plane at about 10:30 p.m., flew to Chino and did a couple of landings.
They were both pretty good! I chalk it up to the calm conditions, but also to the reduced vertical depth perception when you get into the flare. Of course, I didn't want to err on the side of bouncing it hard, so I'm sure I flared just a smidge higher and did a much better job of holding it off nose high and letting it gently settle onto the runway.
I don't plan on doing a lot of night VFR (this was the first time since about 2007), but it's nice to get used to it in case I get delayed on the return leg of a longer trip and have to land in the dark, and to be night-current. What's spooky is the thought of an engine-out in the dark. I could find a road pretty easily, but power lines are downright invisible.
Harder to spot Chino at night than I thought it would be...I expected brighter runway lights. And a little weird using the CTAF and flying it as a "non-towered" field.
They were both pretty good! I chalk it up to the calm conditions, but also to the reduced vertical depth perception when you get into the flare. Of course, I didn't want to err on the side of bouncing it hard, so I'm sure I flared just a smidge higher and did a much better job of holding it off nose high and letting it gently settle onto the runway.
I don't plan on doing a lot of night VFR (this was the first time since about 2007), but it's nice to get used to it in case I get delayed on the return leg of a longer trip and have to land in the dark, and to be night-current. What's spooky is the thought of an engine-out in the dark. I could find a road pretty easily, but power lines are downright invisible.
Harder to spot Chino at night than I thought it would be...I expected brighter runway lights. And a little weird using the CTAF and flying it as a "non-towered" field.