jesse
Touchdown! Greaser!
This stuff isn't rocket science. Throw however much fuel at it is required to maintain a max cylinder temperature of 380 and to remain below whatever your turbo's TIT limit is. If you are full throttle, that'll require full mixture, and in some continentals a fun abuse of the high boost pump to slam even more fuel in. If you are less than full throttle, you can likely lean things out a bit, using the previously mentioned limitations to help you judge how much.
If your max CHT temp and turbo temps are happy - you aren't hurting a thing. If you don't have instrumentation that lets you see the TIT and individual cylinder temperatures, buy that instrumentation. Nobody can afford to run a turbo airplane without it.
I typically do a very rich of peak climb followed by a very lean of peak cruise. Once you know the "right spot" you can quickly set the mixture to where it needs to be for LoP then fine tune a bit to get it right. Unless you're at minimal power settings (like below 65%), it is best to not spend much of any time between "very rich" and "lop", well, unless you like big maintenance bills.
If your max CHT temp and turbo temps are happy - you aren't hurting a thing. If you don't have instrumentation that lets you see the TIT and individual cylinder temperatures, buy that instrumentation. Nobody can afford to run a turbo airplane without it.
I typically do a very rich of peak climb followed by a very lean of peak cruise. Once you know the "right spot" you can quickly set the mixture to where it needs to be for LoP then fine tune a bit to get it right. Unless you're at minimal power settings (like below 65%), it is best to not spend much of any time between "very rich" and "lop", well, unless you like big maintenance bills.