Working on it now. No cracks seen yet. Did dye penetrant test; no cracks found.
Was able to screw stud out 3/4 to 1 inch before it got very tight so I stopped. That through stud must be threaded. Will likely clean well and put aviation form a gasket on the stud shaft before screwing it back into position.
Was able to screw stud out 3/4 to 1 inch before it got very tight so I stopped. That through stud must be threaded. Will likely clean well and put aviation form a gasket on the stud shaft before screwing it back into position.
Last edited: