I went flying in my plane with my CFII for the first time in several months. We recently had been working in the Redbird AATD on some things that I think are easier to teach in the sim than a real plane, and the timing worked well because our weather has been so crappy. So, it was good to get back up in a real plane.
Previously, I had never been able to get the ADF in my plane to work properly. Turns out it was pilot error, coupled with a non-functioning LOM/NDB at my home airport. After my thorough review of the POH, we made a point to test it on various stations on our flight. The good news is that it functioned perfectly. The bad news, is that now I can be tested on NDB approaches when I go to my check ride.
At any rate, I am happy that the ADF will greatly increase the functionality of my plane. It only has two NAV/Coms, and an ADF, with no GPS or DME. A lot of the ILS/LOC approaches in my area seem to say ADF REQUIRED.
Previously, I had never been able to get the ADF in my plane to work properly. Turns out it was pilot error, coupled with a non-functioning LOM/NDB at my home airport. After my thorough review of the POH, we made a point to test it on various stations on our flight. The good news is that it functioned perfectly. The bad news, is that now I can be tested on NDB approaches when I go to my check ride.
At any rate, I am happy that the ADF will greatly increase the functionality of my plane. It only has two NAV/Coms, and an ADF, with no GPS or DME. A lot of the ILS/LOC approaches in my area seem to say ADF REQUIRED.