MyassisDragon
Line Up and Wait
Thought I would post an error in my thinking while using ForeFlight to help others out (dont do as I do, or think like me). Of course I may be the only numbnut that did this, so consider it entertainment at my own expense if thats the case.
While flying on an IFR course above the clouds I will usually set the maps portion "VFR & Ceiling" so I can see what the ceiling is at airports around me in case I need to land. Seems logical right? But I would also get lulled into the pretty colors of VFR,MVFR,IFR, and LIFR (green, blue, red, and magenta).
Well the other day we had snow storms with 1500 ceilings so the airport was "BLUE" but visibility was less than 1/4 MI and it was LIFR. This showed up when I looked at the airport or switched the tab to "VFR & Visibility" .
So the lesson I learned was that Foreflight bases the colors on the VFR requirements just for that particular tab selection IE: Ceiling tab is only based on the VFR requirement for ceilings and Visibility tab shows colors only based on the VFR requirement for visibility.
Yes I know I can always put it on "VFR & Flight Rules" and just look at the pretty colored dots but I like to see that "big picture" of the ceilings on a map 100-200 mile area near my travels, especially when fronts are moving around.
So it would be nice if you could change this in the settings somewhere to show the actual airport conditions in colors when viewing the individual settings.
I will attach the pictures of the same weather with the two different selections so you can see the error of my ways (at least this one)
While flying on an IFR course above the clouds I will usually set the maps portion "VFR & Ceiling" so I can see what the ceiling is at airports around me in case I need to land. Seems logical right? But I would also get lulled into the pretty colors of VFR,MVFR,IFR, and LIFR (green, blue, red, and magenta).
Well the other day we had snow storms with 1500 ceilings so the airport was "BLUE" but visibility was less than 1/4 MI and it was LIFR. This showed up when I looked at the airport or switched the tab to "VFR & Visibility" .
So the lesson I learned was that Foreflight bases the colors on the VFR requirements just for that particular tab selection IE: Ceiling tab is only based on the VFR requirement for ceilings and Visibility tab shows colors only based on the VFR requirement for visibility.
Yes I know I can always put it on "VFR & Flight Rules" and just look at the pretty colored dots but I like to see that "big picture" of the ceilings on a map 100-200 mile area near my travels, especially when fronts are moving around.
So it would be nice if you could change this in the settings somewhere to show the actual airport conditions in colors when viewing the individual settings.
I will attach the pictures of the same weather with the two different selections so you can see the error of my ways (at least this one)