fbo fueling supplies

Let'sgoflying!

Let'sgoflying!

Touchdown! Greaser!
Joined
Feb 23, 2005
Messages
20,771
Location
west Texas
Display Name
Display name:
Dave Taylor
Where would I buy those caps for the fbo fuel nozzles on the self serve pumps?
I busted a hard plastic one, need to replace it - they really need one of those rubber ones.

It’s the Jet A size, this one is 1&5/8” dia
 
We actually got our stuff from the fuel supplier, they don't sell online. Does your jet-a nozzle have a duckbill? I am having trouble picturing the cover you'd seek out. Maybe something like this guy? https://www.jmesales.com/fjord-avia...er-for-opw-295-series-nozzle/?sku=FJSFN15JRED

Regardless, hopefully JME can help :) It's sort of all I can think of, this stuff always felt like "secret product, secret markup" to me.
 
Looks like it would be easy to 3d print one, but no idea if normal printer filament would be dissolved by the fuel.
 
Albany Tom said:
Looks like it would be easy to 3d print one, but no idea if normal printer filament would be dissolved by the fuel.
Click to expand...
I sure wouldn't want bits and pieces of potentially dissolving filament falling into my tank...
 
Seems like maybe a fuel resistance test would be a start.
Then of course someone would have to design it. I wish I knew how.
 
5QK said:
Seems like maybe a fuel resistance test would be a start.
Then of course someone would have to design it. I wish I knew how.
Click to expand...
Or just buy the correct part, here's a 1.5" one that might fit: Fjord Aviation, part number SFN-1.5 ...

www.apsaviation.com

DUST COVER FOR 1-1/2" OPW 295 SERIES ROUND NOZZLE SPOUT

www.apsaviation.com www.apsaviation.com

sfn-1-5-dust-cover-for-1-1-2-opw-295-series-round-nozzle-spout.jpg
 
Nice, EPP.
Fjord only had duckbill shape ones for jetA.
I'm thinking this truck is an old diesel dispenser converted to JetA because it has a large circular opening, 1&5/8" OD.
 
ElPaso Pilot said:
I sure wouldn't want bits and pieces of potentially dissolving filament falling into my tank...
Click to expand...
Me either. Looks like there is an off the shelf solution available, so I wouldn't print it. But also looks like PETG would work for it.

sources: https://www.filamentive.com/chemical-resistance-of-3d-printing-filament/

PETG Chemical Resistance Data Sheet

PETG Chemical Resistance Chart
kmac-plastics.net

Two capped cylinders stuck together would be pretty easy to design, maybe 20 minutes for me, but I'm slow. Maybe an hour to print? I haven't used PETG, but it's supposed to be pretty easy to print. If OP can't get the COTS part to work right I'd be happy to try to make one if you send the dimensions and a rough diagram.
 
schmookeeg said:
We actually got our stuff from the fuel supplier, they don't sell online. Does your jet-a nozzle have a duckbill? I am having trouble picturing the cover you'd seek out. Maybe something like this guy? https://www.jmesales.com/fjord-avia...er-for-opw-295-series-nozzle/?sku=FJSFN15JRED

Regardless, hopefully JME can help :) It's sort of all I can think of, this stuff always felt like "secret product, secret markup" to me.
Click to expand...
Yeah most of ours comes from Titan directly, but we've ordered a good bit from JME.
 
You must log in or register to reply here.
Back
Top