Vf6cruiser
Pre-takeoff checklist
- Joined
- Sep 3, 2012
- Messages
- 181
- Display Name
Display name:
Vf6cruiser
That was great, all those lights!
Wow! How did you get approval to do that? Obviously, the controller was not excited about it at first.
Nice video.
The flashing yellow light on the taxiway after landing, is that what's called a runway guard light?
Also, did you do anything special for wake avoidance?
Also, did you do anything special for wake avoidance?
Seriously, I would have been pretty scared of the wake of that 747.
Have flown single engine piston into MSP, PHL, DFW, ATL and JFK (3x), never called ahead for permission, didn't have any issues.
These were all full stops with a trip to the FBO, they didn't bat an eyelid.
Was with someone who requested LOC RWY 27 into SAN with a low approach and they told him to pound sand. They said, "if you're coming here, you need to land." Seems to make a difference.
For what it is worth, I noticed that the approach on short final was well below the VASI (PAPI, or whatever you want to call it.) I think if it were me, I would have flown the approach with all whites showing and landed 1500 to 2000 feet down the runway.
I went into Cleveland (KCLE) one night just ahead of a massive thunderstorm and right behind a 777.
At night.
This was in the massive, multi engined Apache.
It's just another stinkin airport guys - albeit expensive.
Being that I was unscheduled he did initially say 'leave my airspace'
(not the friendliest greeting I have ever had)
My short and sweet reply was 'unable'
Five seconds of silence then 'fly a right base and follow the triple seven two miles ahead cleared to land'
And that was it. I was just another arrival taxiing to the FBO.
One of the keys to working in and out of big airports with a small plane is to ask for intersection take offs and mid field landings. If you can work off the last half of a 11,000' runway, you offer the controller options to handle you expediently.
Cleveland gets 777's?I went into Cleveland (KCLE) one night just ahead of a massive thunderstorm and right behind a 777.
Midfield landings don't help. They would rather you hit the numbers and get off rather than watch you fly slow longer over half the airport.
Midfields had me on base midfield and setting down at 7000' down an 11,000' runway and getting clear at a high speed right down by where I had to go.
Slow news day in Chicago, only 12 shootings.Very nice but I'm not sure why this is national news.
http://chicago.cbslocal.com/2014/10/23/pilot-of-tiny-cessna-makes-landing-at-ohare/
One of the keys to working in and out of big airports with a small plane is to ask for intersection take offs and mid field landings. If you can work off the last half of a 11,000' runway, you offer the controller options to handle you expediently.
Keeping your speed up helps more. If you can keep 135kts on the GS, it is much easier to work in than a 172 coming in at 70. Even 90-100kts and floating down the runway as you decel is easier.
Let's play with that a bit. Say the pilot uses his superior skill and runs the approach WOT. He's aiming for the last 3,000 of a 10,000 rwy. Judiciously he throws in all the drag inducing functions of his aircraft but it's not enough. He wants to minimize float so as much as he is comfortable he aggressively enters a fwd slip to touchdown. He does the same thing when winds dictate so why not this time when mixing it up with big iron and peevish controllers?
In my limited experience you would have to be exiting a steep dive with a tailwind to not be able to normally lands a 172 on a 10k' runway with full flaps. I did that at CMH once and by easing the flaps in at the appropriate speeds I slowed quickly.
Having done the same thing in a 182 I will say that it was more effective in the bigger plane!