the "not worthy of it's own thread" thread

I showed the avionics shop owner the pictures. I was hoping it was the “boot is longer than antenna” option. He smiled - apparently that’s not an option.
 
Does the Cirrus POH say that starting the engine should be at 2300RPM? Seems like that's what happens whenever I'm near an SR-22
 
Does the Cirrus POH say that starting the engine should be at 2300RPM? Seems like that's what happens whenever I'm near an SR-22
It actually calls for the Cirrus butler to warm the plane up, get the coffee in the cup holder, etc.
 
I used the phrase "sound fishy" in another thread, in reference to a story that didn't add up.

It occurs to me that that doesn't make sense. Fish don't make much noise, alive or dead. Perhaps the phrase should be "smells fishy"? Am I mixing my metaphors?
 
Last edited:
So I've been sick since Tuesday night and have barely left the house.
And the worst part is I think I can pinpoint the exact moment I contracted the illness (Sunday evening). This guy came into the steam room at the gym coughing up a lung and sat down right next to me. I excused myself with haste, but maybe not fast enough lol.
So now my doctor has put me on antibiotics and steroids, and I'm hoping I can FINALLY get some decent sleep tonight. Meanwhile everything that I eat or drink feels like I'm swallowing gravel. Bah! It'll pass, but miserable in the meantime.

Also, this trip to the doctor reminded me my medical expires 1/31. Time to get that appt booked... Random musings of a pilot almost delirious from a lack of sleep! :eek:
 
So I've been sick since Tuesday night and have barely left the house.
And the worst part is I think I can pinpoint the exact moment I contracted the illness (Sunday evening). This guy came into the steam room at the gym coughing up a lung and sat down right next to me. I excused myself with haste, but maybe not fast enough lol.
So now my doctor has put me on antibiotics and steroids, and I'm hoping I can FINALLY get some decent sleep tonight. Meanwhile everything that I eat or drink feels like I'm swallowing gravel. Bah! It'll pass, but miserable in the meantime.

Also, this trip to the doctor reminded me my medical expires 1/31. Time to get that appt booked... Random musings of a pilot almost delirious from a lack of sleep! :eek:
That sucks! Get well soon!
 
If I’m at cruise and I notice carb temp in the yellow, am I ruining the engine by running carb heat for the whole flight? Or should I turn it on and if it doesn’t hesitate (meaning no ice ) turn it off and just fly with it in the yellow arc ? I understand they may not be fully accurate
 
No, carb heat will not ruin an engine. Nor does low carb temp mean you’re about to get ice in the carb.

Review how carb ice forms (higher vacuum in the carb, high humidity, low dew point, etc.)

Review carb ice procedures. If engine stumbles or is low on power, try carb heat. If you loose more power initially but then regain it and then it gets back to normal power output, congrats. You just melted some carb ice. You flew through high humidity air perhaps. Continue carb heat as needed until your conditions change.

Remember, carb heat is just heated carb intake air. As it is heated, it is less dense, your mixture will go richer, and you need to lean.
 
Last edited:
am I ruining the engine by running carb heat
No, carb heat will not ruin an engine.... Remember, carb heat is just heated carb intake air.
In many planes, carb heat is unfiltered air. This is a valid concern, but less so aloft than on the ground. However, the benefit outweighs the concern while aloft. Be sure to turn it off before you taxi.
 
Good point. Isn’t exactly addressing your question, but after you clear the runway post landing, turning carb heat off is as important a part of post landing configuration as flap retraction.
 
If I’m at cruise and I notice carb temp in the yellow, am I ruining the engine by running carb heat for the whole flight? Or should I turn it on and if it doesn’t hesitate (meaning no ice ) turn it off and just fly with it in the yellow arc ? I understand they may not be fully accurate
Wait . . . you have gauges that are at least partially accurate?
 
Good point. Isn’t exactly addressing your question, but after you clear the runway post landing, turning carb heat off is as important a part of post landing configuration as flap retraction.
Flap retraction . . .? Dang! Where's the handle . . .? (PA-15)
 
I don't know who needs to hear this, but someone in New Jersey please tell everyone not to shoot drones tonight...just in case.
 
  • Like
Reactions: WDD
I don't know who needs to hear this, but someone in New Jersey please tell everyone not to shoot drones tonight...just in case.
Just remember that reindeer are out of season.
 
turning carb heat off is as important a part of post landing configuration as flap retraction.
Actually, with some low wing planes I sometimes leave the flaps down so that passengers don't accidentally step on them when debarking.
 
Flap retraction . . .? Dang! Where's the handle . . .? (PA-15)
Which is why my CFI was so adamant about being stopped and clear of runway before pulling levers up. Gives one a second chance to look at and double check you’ve got the right lever.
 
Which is why my CFI was so adamant about being stopped and clear of runway before pulling levers up. Gives one a second chance to look at and double check you’ve got the right lever.
I've never accidentally retracted the gear :cool: (on the Champ, Cub, ERCo, or Vagabond).
 
I’ve once left carb heat on after landing to do a stop and go. Taxi with it on and took off with it. That was stupid. Since then I’ve never forgotten to remove it first thing after I land. Checklist checklist checklist
 
Back
Top