- Joined
- Nov 3, 2020
- Messages
- 1,278
- Display Name
Display name:
Mahneuvers
I just had a X-10 signal bridge removed from my circuit panel. It was already mostly obsolete when I had it installed 21 years ago.
Just took my kids to their first drive-in movie a few weeks back. Put a Queen-size air mattress in the back of the Excursion with blankets and pillows with the JL Audio sound system going. Wife and kids made it through the first movie (Nightmare Before Christmas) but crashed halfway through the second feature (Hocus Pocus). Apparently the blankets and bed were a little too comfy, lol.
There's probably still one installed at the house I lived in in Virginia for 23 years. I never took it out. Amusingly, we moved out and left the house vacant for a couple of weeks while I got the thing ready to go on the market. What I started to find as I was cleaning up was every tape measure that I had lost over the previous 23 years. I had over a dozen of them lined up on the window sill. I took them over to the new house and they immediately scurried off to find new hiding places.I just had a X-10 signal bridge removed from my circuit panel. It was already mostly obsolete when I had it installed 21 years ago.
At least you didn’t drywall them in during a bathroom remodel…There's probably still one installed at the house I lived in in Virginia for 23 years. I never took it out. Amusingly, we moved out and left the house vacant for a couple of weeks while I got the thing ready to go on the market. What I started to find as I was cleaning up was every tape measure that I had lost over the previous 23 years. I had over a dozen of them lined up on the window sill. I took them over to the new house and they immediately scurried off to find new hiding places.
The Safeway grocery store near FAI had a self-serve vacuum tube tester, so you'd know if you needed to buy one. (And yes, they sold 'em.)That's the upside to vacuum-tube radios. They have a working voltage of 100V, vs. 12v in your modern radio. Could get a LOT more volume fed to the earphones....
Ron Wanttaja
Red lights and green lights?Headsets? Microphones? Had none in the Champ I soloed.
The one I remember the most was a dusk-to-dawn Clint Eastwood marathon. Me and a buddy had early Willys Jeeps, we took the tops down and folded the windshield flat to the hood to improve the view.the first drive-in movie I remember was Patton…my parents used to go to drive-ins for date night, probably because they could pack my brothers and me along and not have to pay a babysitter.
Chevy Vega station wagon, orange.
Two channels, ABC and a combined CBS-NBC . . . or was that CBS and ABC-NBC . . . or . . ..Hah! Just a year ago I bought a brand new Jeep with hand cranked windows, didn't know that was even possible.
Toy guns without orange plastic tipped barrels... greenie stickum caps... or roll caps (perforated or not?)... plastic army men to shoot at with your BB gun... bicycles converted to a motorbike with a B&S lawnmower engine... Cox models with gas engines... Estes model rockets... TV Guide magazine with a special "C" symbol to indicate a color program (which later became a special symbol to indicate a B&W program)... TV, period.
Going to the S&H in Ypsilanti with my mom after collecting books of 'em from shoping at the A&P.Green stamps, and yellow stamps.
Free drinking glass in a box of powdered laundry detergent.
Grandpa predicting that people would never pay $1 for a gallon of regular (leaded) gas.
Yep. And a starter.Red lights and green lights?
Why would they if it don’t work anymore. There was a time when ‘the mall’ in itself didn’t need to be ‘sold.’ Where would they sell it. Internet hadn’t even been invented yet. But malls were the demise of Downtown.Back in the day, the malls always had some activity happening to draw in customers. A local orchestra or a choir doing Christmas music, a weekend car show, an arts & crafts fair, tasting parties by local restaurants, celebrity autographs, book signings, pet shows, etc., etc. None of the local (and dying) malls do that sort of thing anymore.
I want one! Where did you get the timer?... Speaking of timers, my original one just set the on/off times, which I had to adjust every month or so due to the length of the day changing. My current one just needs me to set the current time, the on-off times, and my house's latitude. Adjusts the on-off time each day accordingly. Needs a watch battery every five years or so, at which point I have to dig out the manual and figure out how to set it, again.
Lowes. Intermatic Model ST01 Self-Adjusting Wall Switch Timer. They're $56 on Amazon. It's kind of complicated to set up, but works fine.I want one! Where did you get the timer?
General Milton Hershey.
The bad 'ol days.
But, CNAV is going to make a comeback. You can't spoof the sun and stars!
C.O.D. turns!… bench seats…. Guaranteed to bring her close.
You could probably eject the egg without peeling it.The E-3 has a sextant port right behind the cockpit entrance. We got bored over Afghanistan one night and learned you could peel a hard boiled egg and eject it into the atmosphere through that port.
Your turn is coming, and it's sooner than you think.
Yeah I remember a strong solvent smell. Ambroid model glue also got to my head one day while building a plane, I started to feel way too happySuper elastic bubble plastic from Wham-o
I can still remember that slight high you would get from breathing in from the straw.
I miss Ambroid... the smell, and peeling it off my fingers the next day in class.Yeah I remember a strong solvent smell. Ambroid model glue also got to my head one day while building a plane, I started to feel way too happy
Wiring, maybe? My wife's car has a taillight out, but it's the part of the taillight that's on the tailgate. Every time I go to fix it, by the time I get the interior bits off so I can look at the wire, it starts working again. Nothing visibly wrong, and of course it always refuses to fail again when I'm working on it. So, I patch it up, and wait a couple of weeks/months for it to go out again... Grrrrr.Conversely, I see more *tail lights* out, these days. Curious. They're LED as well.
This!!! Every LED bulb I've had fail has been in the power section. Unfortunately, the way they build them now the whole base is usually filled with potting material so they're exceedingly difficult to fix and I've kinda given up and just chuck 'em now. Used to be able to break out the soldering iron and fix them.I too have exterior LEDs but they are on 24/7/365 unless we lose power. They last a very, very long time. Certainly many times longer than incandescents. However, internal LEDs, same bulbs, that frequently get switched on and off--not so much. Yes, they out live incandescents, but not nearly by as much as the 24/7/365s. What I find aggravating is, it's not the actual Light-Emitting Diodes. It's the electronics adjusting the 110V house current to the whatever the LEDs need.
I have a galena crystal and a cat whisker in a cabinet out in the garage. One of these days…