What is the AN number for a AN6 flare to 9/16 18 fitting

S

Scott MacMoyle

Pre-takeoff checklist
Joined
Mar 12, 2019
Messages
155
Display Name
Display name:
Scott M
I can find these all day long if I wanted an automotive part but I cant find the number on any aviation sites. I need it for the HA6 carb on my Grumman Tiger. I sent the engine off for overhaul and forgot to remove it. I can get a AN814-6 plug for the other end. I have Grumman part numbers but they dont cross reference. I hope Penn Yan can find them and send to me otherwise I guess I might pay grumman prices if they can be sourced by Grumman parts guys.
 
No, #6 male flare on one side and the same thread size on the other end (9/16-18) not pipe thread
 
If it's not an AN815 then it's a speciality fitting modified by Grumman.

FYI: Quite a few OEMs take AN fittings, machine a few things then repackage as a OEM P/N at 3x price.
 
Which would explain why it has a grumman PN but says AN on the fitting. Thanks for your reply though.
 
Looks like an 815 union with one end cut off. Might be a speciality part made by Grumman. Any machine shop could modify a 815 for you in less than 10 minutes if they knew the diameter of that screen that slip fits inside.
 
Scott MacMoyle said:
I can find these all day long if I wanted an automotive part but I cant find the number on any aviation sites. I need it for the HA6 carb on my Grumman Tiger. I sent the engine off for overhaul and forgot to remove it. I can get a AN814-6 plug for the other end. I have Grumman part numbers but they dont cross reference. I hope Penn Yan can find them and send to me otherwise I guess I might pay grumman prices if they can be sourced by Grumman parts guys.
Click to expand...

You need a parts manual for the carburetor or call one of the aftermarket companies like Avstar Fuel Systems.

http://www.avstardirect.com/av2523903-adapter-strainer/

http://www.avstardirect.com/av2577129-inlet-fitting/

http://www.avstardirect.com/av2538889-plug-hex-head/

http://www.avstardirect.com/av95-530-fuel-inlet-strainer-assy/
 
Last edited:
Update. Penn Yan found the fittings and sent them to me so Kudos to them. Alls well that ends well.
 
You must log in or register to reply here.
Back
Top