CJones
Final Approach
Was planning a flight from KCCO (just SW of ATL) to KDSM (Des Moines, Iowa) this weekend. Original plan was to fly up there tomorrow (Friday) and come back sometime Tuesday. It's been a while since I have planned a full flight with such widespread and low IMC, so just looking for a double check on my synopsis here.
TAFs for the entire route are indicating fairly low (< 1,000') ceilings at least until noon tomorrow. That means I would potentially have a hard time finding an alternate for filing purposes without having to allocate most of my fuel to getting to that alternate.
Area forecast for Iowa is calling for freezing drizzle/mist/low ceilings tonight with layers up to FL250 overnight. Combine that with the Prog charts for the next few cycles and it looks like the crud that is causing the ice/high clouds tonight won't be moving out of the route any time soon.
Winds aloft forecast for the DSM area are showing temps right around 0*C at 6k.
At this point, based on the information currently available, I'm looking at a no-go. Low ceilings don't bother me by themselves, but with low ceilings over such a widespread area, finding a filable alternate might be a pain. Not to mention the whole 'freezing drizzle' issue plus fairly high freezing level.
BTW - equipment is a non-pressurized, non-FIKI single with a self-imposed ceiling of 10k due to young kid on-board and no oxygen.
So is there any 'loophole' that I'm missing?
TAFs for the entire route are indicating fairly low (< 1,000') ceilings at least until noon tomorrow. That means I would potentially have a hard time finding an alternate for filing purposes without having to allocate most of my fuel to getting to that alternate.
Area forecast for Iowa is calling for freezing drizzle/mist/low ceilings tonight with layers up to FL250 overnight. Combine that with the Prog charts for the next few cycles and it looks like the crud that is causing the ice/high clouds tonight won't be moving out of the route any time soon.
Winds aloft forecast for the DSM area are showing temps right around 0*C at 6k.
At this point, based on the information currently available, I'm looking at a no-go. Low ceilings don't bother me by themselves, but with low ceilings over such a widespread area, finding a filable alternate might be a pain. Not to mention the whole 'freezing drizzle' issue plus fairly high freezing level.
BTW - equipment is a non-pressurized, non-FIKI single with a self-imposed ceiling of 10k due to young kid on-board and no oxygen.
So is there any 'loophole' that I'm missing?
Last edited: