I am an Air Assault Trooper, a Paratrooper, a Jumpmaster and a Parachute Rigger. The following is an excerpt from FM 57-220 Airborne Operations Field Manual in regards to a "hung" or "towed" parachutist on a rotary wing aircraft.:
My experience with Sling Load Operations makes me aware that I must ground the electrostatic charge before touching the aircraft hook to connect sling. My experience with STABO, SPIE, Fast Rope and Rappel Operations from rotary wing aircraft makes me aware that the ropes must contact the ground to discharge the electrostatic charge before touching the rope and before my body contacts the ground.
In the case of a towed parachutist from rotary wing aircraft, with the above quoted procedures in mind, with the aircraft at a hover, wouldn't it still be necessary to ground the electrostatic charge before the jumper or jumpmaster contacts the ground? Is there a safety message regarding this? Where can I find it?
Thanks
Bolwinkle
"The JM notifies the pilot that a parachutist is being towed. The JM recovers and stores all
other deployed static lines and deployment bags. The pilot slowly descends to the DZ or
other appropriate site and brings the aircraft to a hover. The JM (Jumpmaster) unhooks the towed
parachutist's static line, deplanes, and frees the towed parachutist."My experience with Sling Load Operations makes me aware that I must ground the electrostatic charge before touching the aircraft hook to connect sling. My experience with STABO, SPIE, Fast Rope and Rappel Operations from rotary wing aircraft makes me aware that the ropes must contact the ground to discharge the electrostatic charge before touching the rope and before my body contacts the ground.
In the case of a towed parachutist from rotary wing aircraft, with the above quoted procedures in mind, with the aircraft at a hover, wouldn't it still be necessary to ground the electrostatic charge before the jumper or jumpmaster contacts the ground? Is there a safety message regarding this? Where can I find it?
Thanks
Bolwinkle