peter-h
Line Up and Wait
Here in the UK nobody can touch this item, and a friend of mine is trying to troubleshoot his autopilot before he sends off various bits to the USA where people actually understand this stuff.
I have schematics for my servos (KS270C etc) which have similar connections but there are many differences.
It is obvious that the clutch solenoid is not doing anything. With 12V applied to pins E,H and with GND to pins C,N and with a jumper between pins B,M, all as per the KFC150 IM wiring diagram, the servo is totally dead and is drawing 0.48mA which is an amazingly low current. With these connections, the solenoid should energise.
Much appreciated. You can email to
peter (at) peter 2000.co .uk
I have a big collection of avionics manuals, if you need anything.
I have schematics for my servos (KS270C etc) which have similar connections but there are many differences.
It is obvious that the clutch solenoid is not doing anything. With 12V applied to pins E,H and with GND to pins C,N and with a jumper between pins B,M, all as per the KFC150 IM wiring diagram, the servo is totally dead and is drawing 0.48mA which is an amazingly low current. With these connections, the solenoid should energise.
Much appreciated. You can email to
peter (at) peter 2000.co .uk
I have a big collection of avionics manuals, if you need anything.