Seems like most of us that have been here since the beginning have said all we had to say about aerobatics.I am surprised I had to go back several months to find links in this sub group.
So, how do YOU do an aileron roll in a Citabria, and do you find it difficult to do a "10" competition roll in a Citabria? Do you ever lose much oil when you do hammerheads in a Citabria?I must admitt that I do teach introductory acro, (using a 7ECA) and have found it to be the most rewarding of all phases of instruction.
I always though aerobatics was for pilots who could not master straight and level flight!! LOL
I would someday like to try it though. My home aerodrome has a lot of aerobatic guys who compete and at least one who earns a living at it.
Welcome aboard to PoA!!
In the primary sequence, it's a slow roll without hesitation. It's tough to do without cheating and nosing up a little bit at the beginning of the roll. And my arm isn't long enough to push the stick far enough forward inverted to keep that darned nose up. What points I lost in the roll, I tried to make up for in the spin.i have heard different people call different rolls competition rolls. i have always believed that to be a 4 point hesitation roll. if this is what you are referring to, then my answer would be a citabria doen't have the roll rate for a really good one. by using 140 at the entry,and using close to 2g's during the inverted portion,(even then it's hard to hold the horizon) and not stopping for more than a quick second at each 90, it can be done.
Thanks!as a side bar, i love your pics and videos from your "farm".
That would be great...come see us sometime.maybe someday i'll be able to stop in for a visit.
Anyway,, didn't mean to get so long winded, but come on people, we're talking ACRO here, how can you not get excited about it!!!!
I have a terrible time understanding people who do not like this crazy hobbie of ours!
for the aileron roll, i like to get 130 indicated, about a 2g pull to around 20 degrees above the horizon,(this leaves 120mph for entry) go to neutral elevator,full left aileron with just enough left rudder to stop any yaw. just a few degrees before inverted i'll put just a bit of forward stick to "unload" the airplane. at around 300 degrees of roll i'll bring in a little left rudder to finish the roll. i have heard different people call different rolls competition rolls. i have always believed that to be a 4 point hesitation roll. if this is what you are referring to, then my answer would be a citabria doen't have the roll rate for a really good one. by using 140 at the entry,and using close to 2g's during the inverted portion,(even then it's hard to hold the horizon) and not stopping for more than a quick second at each 90, it can be done. just not clean and crisp like in a pitts or similar aircraft. i've never noticed any oil loss during the hammerhead. i use 140 indicated for the entry. pull a solid 4.5 to 5 g's on entry, try to stop on a good verticle,and just before it runs out of energy,gently step on the left rudder,using just enough right aileron,and forward stick to make a clean "level" turn. BTW, a good hammerhead is one of my favorite manuvers.
as a side bar, i love your pics and videos from your "farm". maybe someday i'll be able to stop in for a visit.
THANKS to all who welcomed me on to the board!!
Steve
Dudley,
I agree entirely. I just failed to mention getting off the rudder beyound "coordinating" the entry. i guess i was assuming it was implied when i followed with bring in enough left rudder to finish the roll. Even as instructors, we can learn everyday if we just pay attention. I also agree that the best way to learn, is to teach!! for me there is little in life as rewarding as seeing the student accomplish their goals.
THANKS
Steve
I've always believed I didn't even begin to learn to fly until I became an instructor. The two best instructors I ever had were the airplane and the student.
As a side bar, a few years back a friend bought a 112, I did his complex check out in it. Then he moved up to a 114 and we did his instrument and commercial in it. One heck of an airplane. I'm 6'1" and 230lbs, and Ron was every bit that big. We had plenty of room left over after closing the doors. Very stable aircraft,easy to fly and land as well. Really enjoyed the time I spent in it.
Steve
Im working toward my PPL currently and cannot wait to take the aerobatic/spin training course next year. I would like to find someone near me one of these days with a two seater to take me up and see if i can even hold down my biscuits.