Snowmass
Line Up and Wait
Of course. Pikes Peak and Manua Kea highways are fictional. And all those hikers topping those many Colorado fourteeners without oxy are photo shopped.
Inexpensive oxygen for 2
- Thread starter AnthonyS1
- Start date
wsuffa
Touchdown! Greaser!
Or you can find a pilot with a used system that they will let go cheap.
- Joined
- Apr 5, 2017
- Messages
- 3,912
- Location
- hopefully not at work
- Display Name
Display name:
Meet the Fokkers
I almost need oxygen just to hike at sea level.
Landing Fees
Pre-takeoff checklist
- Joined
- Feb 9, 2018
- Messages
- 387
- Display Name
Display name:
Landing Fees
Poor guy, he thinks Pikes Peak and Manua Kea highways are fictional. Might be oxygen deprived.
brcase
En-Route
My experience in an altitude chamber seemed to just reinforce that I could be susceptible to hypoxia in a similar manor shown in the video link above.
This night vision demonstration in the chamber was literally enlightening as well.
Brian
CFIIG/ASEL
PaulMillner
Line Up and Wait
actually, yes... oxygen concentrators work great in airplanes. See my Aviation Consumer article.
Paul
http://www.secure4host.net/upload/files/AviationConsumer_O2_Concentrators.pdf
Snowmass
Line Up and Wait
I have an inexpensive homebrew system which would probably cost a few hundred dollars today plus masks using a medical regulator and a standard 44 FT^3 steel tank
. My system will take as many masks as you want to you desire by simply silver soldering on more delivery tubes. I plugged each outlet with pieces of brass with 1/16" orifice drilled to provide sufficient back pressure to keep flow equal at each outlet. I verified flow rates by bubbling into glass jars under water. With masks that come with needle valve and flow indicators you can set flow individually.
. My system will take as many masks as you want to you desire by simply silver soldering on more delivery tubes. I plugged each outlet with pieces of brass with 1/16" orifice drilled to provide sufficient back pressure to keep flow equal at each outlet. I verified flow rates by bubbling into glass jars under water. With masks that come with needle valve and flow indicators you can set flow individually.