Can you splice a GPS antenna?

NealRomeoGolf

Final Approach
PoA Supporter
Joined
Apr 12, 2016
Messages
5,123
Location
Illinois
Display Name

Display name:
NRG
So, can you? Can one antenna support more than one position source?
 
So, can you? Can one antenna support more than one position source?

Let me set the stage for you. You are attempting to receive a signal from a satellite some 12,000 miles away transmitting a few watts which means nanovolts to your antenna (nano -- 10^-9). Now you want to split (- 3 dB) that signal still further to make your receiver work twice as hard, or take twice the time to give you position?

Boy, that seems like a hell of a good idea to me.

Jim
 
Let me set the stage for you. You are attempting to receive a signal from a satellite some 12,000 miles away transmitting a few watts which means nanovolts to your antenna (nano -- 10^-9). Now you want to split (- 3 dB) that signal still further to make your receiver work twice as hard, or take twice the time to give you position?

Boy, that seems like a hell of a good idea to me.

Jim

So is that a yes?

:cool:
 
Let me set the stage for you. You are attempting to receive a signal from a satellite some 12,000 miles away transmitting a few watts which means nanovolts to your antenna (nano -- 10^-9). Now you want to split (- 3 dB) that signal still further to make your receiver work twice as hard, or take twice the time to give you position?

Boy, that seems like a hell of a good idea to me.

Jim

Electronics and such is a foreign language to me, a lot like accounting is to others. That's why I'm glad you have the knowledge and can help me out.

So now my airplane gets to join the cool 2 GPS antenna club.
 
Let me set the stage for you. You are attempting to receive a signal from a satellite some 12,000 miles away transmitting a few watts which means nanovolts to your antenna (nano -- 10^-9). Now you want to split (- 3 dB) that signal still further to make your receiver work twice as hard, or take twice the time to give you position?

Boy, that seems like a hell of a good idea to me.

Jim

350.png
 
Let me set the stage for you. You are attempting to receive a signal from a satellite some 12,000 miles away transmitting a few watts which means nanovolts to your antenna (nano -- 10^-9). Now you want to split (- 3 dB) that signal still further to make your receiver work twice as hard, or take twice the time to give you position?

Boy, that seems like a hell of a good idea to me.

Jim

http://www.freeflightsystems.com/products/ads-b/accessories/antenna-splitter
 
I seem to remember some antennas are 'active' and require power. Might not be as easy to split.
 
If it's not installed per the Garmin installation instructions, it probably doesn't meet TSO requirements.


Sent from my iPad using Tapatalk
 
If it's not installed per the Garmin installation instructions, it probably doesn't meet TSO requirements.


Sent from my iPad using Tapatalk

There was a debate online somewhere about this very issue, equipment vendor B needs a GPS antenna and received STC that included an option to splice into a coax that feeds GPS signal from an antenna to equipment vendor A, a WAAS/LPV navigation system.

I highly doubt this would ever be acceptable on a Part 25 aircraft, but it would be handy if it was since it is very time consuming and expensive to put antennas on them with DTA of pressure vessels and all that.
 
Even though the GPS signal is weak, your GPS knows (should know) where to look for the satellites and as such can "focus" on the signal and collect enough data for the processor to get a location. The GPS remembers where it was when it was turned off so it knows where to look for the satellites. If you move a GPS a significant distance, it won't be able to find the satellites it is looking for and will take a long time to go through the whole catalog before it gives a location.
 
Back
Top