Todd Copeland
Pre-takeoff checklist
I have a 1973 cessna 172. I want to remove the speaker when I re-do the avionics this summer and my A&E says it must stay as it was there as original equipment! This can't be true, can it?
Todd
Todd
While it was original equipment, the question is...Is it required equipment? You will need to consult the TCDS and from there it will give you certification data, I believe its CAR3. You can see if its even mentioned. If not you should be able to pull it out.I have a 1973 cessna 172. I want to remove the speaker when I re-do the avionics this summer and my A&E says it must stay as it was there as original equipment! This can't be true, can it?
Todd
Why do you want to remove it?
While it was original equipment, the question is...Is it required equipment? You will need to consult the TCDS and from there it will give you certification data, I believe its CAR3. You can see if its even mentioned. If not you should be able to pull it out.
Because that aircraft was built before the age of headsets, and the rules were different then. However, since "standard equipment" in airplanes built in those days didn't include radios at all, I don't see how the speaker could be an R-item.Where do I find this? I can't imagine it's required equipment. I could legally fly it without a radio or transponder in certain airspace. Why would a speaker that isn't used be required in the age of headsets?
Ok you will not find equipment listed in theTCDS like you think. Refer to my first post..... in the tcds you will see a note that says data pertinent to all models. "Certification basis"Alright, I might be an idiot here but with this search I'm not seeing equipment lists. I googled it several ways and I am not finding required equipment lists.
There has to be, as part of the certification documents, but it's not in the TCDS or (I'm guessing) the 1973 owner's manual. As I said, if you really want to know, you'll have to ask Cessna or the ACO.No required equipment list for a 1973 Cessna 172.
Alright, I might be an idiot here but with this search I'm not seeing equipment lists. I googled it several ways and I am not finding required equipment lists.
There has to be, as part of the certification documents, but it's not in the TCDS or (I'm guessing) the 1973 owner's manual. As I said, if you really want to know, you'll have to ask Cessna or the ACO.
It is called the world of 'certified' airplanes!All this for a speaker?
Let me Google that for you only works when the Google results include the information the OP was asking for.
MEL is airplane specific, not required for a SEL unless used in 135 operations, and would be on file with the FAA, if it existed, which is doubtful.
A MMEL is a template for a type of aircraft, and is used when creating a MEL for a specific plane. Again, not required for piston airplanes, so probably never developed by Cessa.
The TCDS will list any mandatory requirements, such as placards that must be present, and operating parameters.
Newer Cessna POH indicate what equipment is required for flight; older ones do not. As suggested earlier, it might be best to contact Cessna.
http://www.pilotsofamerica.com/forum/showpost.php?p=1029730&postcount=1It is called the world of 'certified' airplanes!
Well, I must admit, this is interesting.....the TCDS for my 1948 Cessna 170 is very specific and has an equipment list that lists required and optional STC items for engine accessories, wheels, brakes, interior equipment....etc.Alright, I might be an idiot here but with this search I'm not seeing equipment lists. I googled it several ways and I am not finding required equipment lists.
Well, I must admit, this is interesting.....the TCDS for my 1948 Cessna 170 is very specific and has an equipment list that lists required and optional STC items for engine accessories, wheels, brakes, interior equipment....etc.
The TCDS for the Cessna 172 does not include anything of the sort.
Any 172 you can find should have the aural stall warning system which was required under its certification. Beyond that, I have no idea of the relevance of what is required in bizjets certified under Part 25 to a light single certified under CAR 3.Show me a Cessna 172 that has an aural warning system as found in bizjets (which was required for certification).
I know that, and you know that. But the question is whether one can find the documents to prove it.The speaker is optional in the 172, just like the radios are to begin with.
Okay, now my memory is clearing up.....I now recall seeing the equipment lists in the 172 POH, whereas in the earlier days of the 170, they put that stuff in the TCDS - there is no equipment list in the 170 AFM (only 2 pages) or Owners Manual.The TCDS will list any mandatory requirements, such as placards that must be present, and operating parameters, but not an equipment list.
Newer Cessna POH indicate what equipment is required for flight; older ones do not. As suggested earlier, it might be best to contact Cessna.
Any 172 you can find should have the aural stall warning system which was required under its certification. Beyond that, I have no idea of the relevance of what is required in bizjets certified under Part 25 to a light single certified under CAR 3.
I know that, and you know that. But the question is whether one can find the documents to prove it.
It was the first one at the top. < <<<Let me Google that for you only works when the Google results include the information the OP was asking for. .
So why would it matter what a 135 has to comply with? Is also company specific per the ops manual. Im sure that doesn't apply either.MEL is airplane specific, not required for a SEL unless used in 135 operations, and would be on file with the FAA, if it existed, which is doubtful..
Even if you could find one for his aircraft, you cant use it. Unless its 'Approved" for your use.A MMEL (Master Minimum Equipment List) is a template for a type of aircraft, and is used when creating a MEL for a specific plane. If Cessna ever published it for the 172, I can't find it. They exist on Cessna's website for the turbines, but not for the pistons..
If you take the speaker out without the proper paperwork the airplane will crash into a school for crippled children and the insurance will not pay.
The FARs are written in blood.
The TCDS won't help the OP.The OP needed a TCDS, i gave him one.
The POH issued with all Cessnas from 1978 on is indeed a regulatory document, serving as the AFM required by Part 21 and regulated by Part 23, and it contains the equipment list for those aircraft. However, the Owner's Manual for a 1973 172 is not, and does not contain the equipment list the OP needs to prove to the mechanic that the speaker is not an R-item.Cessna POH IS NOT A REGULATORY DOCUMENT, hence has NO weight in the discussion.
The Cessna 170? Yes, it does. Doesn't include every available STC, but several are indeed listed on the current TCDS.That TCDS has STC stuff listed on it? Are you sure?
Let me guess... You would rather have an experimental? No kiddin. I didn't see that one coming.
Seriously, this thread hurts my head. I'll stick with my experimentals. If I want to remove a speaker ( there would never have been one in the first place) I can. Maybe do a new W&B, enter the deed in airframe log, done.
A speaker? Really?
The OP needed a TCDS, i gave him one.
Cessna POH IS NOT A REGULATORY DOCUMENT, hence has NO weight in the discussion.
MEL is a completely different topic, have no idea why you would bring that up.
The TCDS won't help the OP..
What does the pneumatic part have to do with it? FWIW, the early 172s (and the 170B model) are not pneumatic - they are lifting vane stall warning devices and are required equipment.Um NOOOO. The 172M is a pnuematic stall warning system. Even the electric ones have a separete speaker for the stall system.
I don't know why either...
He needs the TCDS, which refers to CAR3. I understand what CAR3 is, but I can't find the text of it online anywhere... even with my ninja Google-fu.
Basically, Cessna called out some placards, Prop/Engine requirements, and acrobatic limitations in the TCDS, and then for everything else, said "refer to CAR3". Is this right?
What does the pneumatic part have to do with it? FWIW, the early 172s (and the 170B model) are not pneumatic - they are lifting vane stall warning devices and are required equipment.
Not quite sure what point you are trying to make? Unless we misunderstood you, it sounded like you were claiming that Cessnas did not have an aural warning systems required for certification, which does not seem correct.
We already know it's CAR3. Problem is, it doesn't list the equipment included in the original certification beyond that required by CAR 3 -- only way to get that is to ask the ACO or Cessna.yes it does. It references you to the certication basis so you can look there.
Still not all-inclusive. For example, the electrical system is required on all electric flap 172's, but you won't find that in CAR 3, the TCDS, or 91.205.The TCDS covers how the airplane was certificated and the very basic equipment required to do so, but does not always include everything. FAR part 91 also applies.
We already know it's CAR3. Problem is, it doesn't list the equipment included in the original certification beyond that required by CAR 3 -- only way to get that is to ask the ACO or Cessna.
So you're saying that since there is nothing in CAR 3, 91.205, or the TCDS requiring the electrical system of an electric flap 172 to be working, you can fly one without it?Why would the FAA require anything beyond it's own rules? Cessna is not the FAA...
So the FAA required 1, 2, 3, 4 to get certified. 5, 6, 7, 8 and 9 is optional...