Any VW Powered Aircraft Owners Here?

FormerHangie

FormerHangie

En-Route
Joined
Oct 28, 2013
Messages
3,965
Location
Roswell, GA
Display Name
Display name:
FormerHangie
Does anyone here own or has owned a VW powered airplane? I've been hearing about VW power in homebuilts for decades now, and they don't seem to have either caught on or died out, they just seem to stay in the background.

If you have any experiences with them, I'd love to hear about it. It's just for curiosity's sake, I'm not planning on getting back into power flying.
 
The first video the airplane has 1/2 vw. The second video the airplane uses a full VW.
 
The vast majority of the Sonex fleet is VW Powered. sonexbuilders.net has lots of discussion about VW engines. Mine will be VW power but not sure from where, Sonex, Hummel, Revmaster, Great Plains ?

Cheers
 
VWs are fairly small engines, so they'll always be relegated to relatively small one or two place aircraft that aren't sexy enough for much attention in the aviation media. I just sold my half VW powered Fisher 404. It was reliable, extremely economical, and low performance.
 
Dana said:
VWs are fairly small engines, so they'll always be relegated to relatively small one or two place aircraft that aren't sexy enough for much attention in the aviation media. I just sold my half VW powered Fisher 404. It was reliable, extremely economical, and low performance.
Click to expand...

Kit planes just did an article on the Cygnet. It's not a bad little airplane and draws a lot of attention wherever it goes.
 

Attachments

  • SAM_6753.JPG
    SAM_6753.JPG
    145.3 KB · Views: 62
I flew in Jerry's other Cygnet. It flew with two aboard at 105 on the ASI. When we flew mine to my home we had her at 90 ASI. with two aboard. She has the smallest VW they make. The 1700cc version.
 
Years ago my uncle put one in his KR-2, which he built from plans. He liked the VW engine because it was cheap and he knew it well, after having rebuilt one for his car.

It did not speed his project, to use this engine. In fact, if had used a ready-made engine he might have been able to actually fly his plane. As it was, he got sick (in his early 80s) and passed away while trying to resolve fueling problems with the engine, testing it with high-speed taxiing. His decades-long project was almost ready for flight, but just didn't quite make it in time.
 
Last edited:
I've had two Sonex. The first was built by someone else. The second I built. Both had the Aerovee. They work
ok but they're finicky
 
I have one in the Sonex I built. There are still a popular engine. Aerovee, Great Planes, and Revmaster seem to make the majority of the conversions. I wouldn't say that they are finicky. Cooling is a common issue but that is because most people are running 80hp versions of a motor that was originally designed for 36hp. They are also sensitive to valve adjustments which must be done every 50 hours. It is a simple process that takes about a half hour but is absolutely necessary to keep a smooth running engine.

Performance for cost is what the engines are mostly about. My engine was $7500 all in including intake, exhaust, cooling baffles, etc. A new set of pistons and cylinders can be had for $150 (for all 4). Cam's are $75, etc. The whole engine can be overhauled for a few hundred bucks. The power isn't the same as a Lycoming but the weight isn't either. My aervoee engine puts out 80hp and weighs 170lbs full up. flying solo my sonex climbs out at around 800FPM and cruises at 135MPH. Where it suffers is when you get closer to gross weight. At gross weight my climb drops off to 300 FPM. Sonex has come out with a turbo that helps but I think the limits are already being pushed at 80hp and won't consider it until they have been flying for a few years and we can see if there are any reliability issues.

Keith
 
I used to have a Revmaster 2100 in a Tri-Q2...very efficient, and ran well, although as kmacht mentioned it liked to run hot.

Pic of me in 1996 with the Tri-Q2:

upload_2017-7-20_10-12-5.png
 
It's the Rev-Flo or Posa carbs that are finicky, not the engines. Put an Ellison Throttle Body EF-2 and you'll never need to touch it again once it's set where you want it.

Heat will kill a VW and running them faster than 3100 for extended periods will cause failures eventually. Heat is generated from internal friction. Keep the RPM's below 3100 with a nice coarse prop that gives you full throttle at that RPM, check the valves at 25 hour oil changes, and it'll run as long as a Lyc or Continental. VW's love running at 3000-3100. Use Manley valves or whatever you think is as good, make sure your guides are perfect to start with (they are often not - even with Lycs and Continentals), use elephant feet (swivels) on the tappets (or rollers) and as long as you chose a good engine to start with - which means either Great Plains or Revmaster - you've got a really excellent, trustworthy engine.
 
1600vw said:
I flew in Jerry's other Cygnet. It flew with two aboard at 105 on the ASI. When we flew mine to my home we had her at 90 ASI. with two aboard. She has the smallest VW they make. The 1700cc version.
Click to expand...
I now have the Airplane Tony speaks of 2276cc VW it is a delight to fly. Search on NX237F in youtube to see it in action. The Cygnet has allot of wing and is clean. Climbs well at full gross on a hot day without overtaxing the heads.
 
You must log in or register to reply here.
Back
Top