Evening, I was trying to plan ahead for engine and avionics overhauls on my 182L, and started to think about a new plane rather then buying new stuff. I generally fly 300 to 480nm flights nonstop, I had wanted to put a 430w and autopilot in the 182 for gps rnav but at those costs I could just sell the plane and buy something that has it cheaper.
I looked on vref and ballpark it shows around 60k, I'd be surprised if I got 50, but including just the cost of avionics it lands me in the v35 territory anyway. It has better load carrying, 1300s vs just 1050, better speed, 160-175ktas vs the 140ktas I plan for, higher fuel burn 14-16 vs 10.5-12gph but cuts out enough time to balance out.
Is my thinking on track or have I missed something
Flying the Beech Bonanza by John C. Eckalbar is a highly-recommended book for anyone flying a Bonanza. It's a comprehensive overview of the performance and handling characteristics of the entire 33/35/36 line.If you fly ifr go to utube and watch the one about spiral divergence in Bonanzas.
Ended up selling the 182...bought a S35.
I sat on an 1957 H35, and I was not impressed with the interior space compared to my PA-28-236. Is the cabin space on subsequent generation of Bonanzas significantly larger?
The difference is retractable gear. Thats a fairly big issue. You can never forget it. All it takes is once. Bo is going to be more expensive to own and burn more fuel. But it will go faster. They are both nice airplanes.
Here's what the control surfaces end up like when they are left to the elements. All the people I know that have Bonanzas hangar them, and this is one reason.
Does anybody know if the straight tail Debonair/33 control surfaces were also magnesium?
View attachment 58890
I can’t remember if all of them started as aluminum, but all the 33s can become aluminum tail feathers.
Here is another interesting item I read somewhere- there are few if any in flight breakups of a 33. There are even acrobatic veariants.
That's correct. But there's a price: the aluminum skins weigh significantly more, exacerbating an already tenuous aft cg location in many Debs.I believe there is an STC for the be33 to convert from mag to alum, but not for the 35s.