Anthony
Touchdown! Greaser!
- Joined
- Feb 23, 2005
- Messages
- 18,478
- Display Name
Display name:
Anthony
You'd probably fit just fine but your trident wouldn't.
Too funny! (King Neptune he ain't).
You'd probably fit just fine but your trident wouldn't.
Even driving an extra hour to where an acro plane is available is a fail. How many guys are going to do that frequently enough to maintain their tailwheel (typically) and acro currency to an appropriate level?
Plenty of pilots could afford a dirt simple $20K O-320-powered Acro Sport bipe that could sit in the back corner of their hangar for some cheap fun...if they really wanted to. You don't need to buy a brand-new $500K Extra 330. I know plenty of pilots with two (or more) airplanes. It comes down to what you want, and how much you want it.
Plenty of pilots could afford a dirt simple $20K O-320-powered Acro Sport bipe that could sit in the back corner of their hangar for some cheap fun...if they really wanted to. You don't need to buy a brand-new $500K Extra 330. I know plenty of pilots with two (or more) airplanes. It comes down to what you want, and how much you want it.
Hmm so seems like access is the big issue. Wonder how practical a non profit acro club would be. If that would lower cost enough to be more attractive.
Could you "rent" a RV7a if its part of a flying club? No scary tailwheel, low enough operating cost, sidexside for easy instruction and probably durable enough if you keep it to gentlemanly acro.
You said it right there. Hangar space.
If you have a box hangar, yes you can cram a Pitts back in the corner. But if it's a T-hangar you can't fit any other aircraft I can think of.
Y'all were talking about cockpit room, if I were going to dip my toe into the water, a Christen Eagle has been the roomiest full acro plane I've been in for my 6'4" average frame.
You can fit 2 Eagle cockpits in the Model 12
As to the Acro Sports, I'm not a fan of wood spar and fabric, but if it was metal I'd be all over it at that price point.
Wood/fabric is the most successfully proven design for aerobatic wings. Why do you have reservations? I know of a whole lot more failures of metal aerobatic wings than wood/fabric. Actually, I don't know of any failures of wood/fabric aerobatic wings. There are good reasons serious aerobatic wings are either built of wood or carbon fiber.
A Pitts S-1, some CAP 10s and a Laser spring to mind.Actually, I don't know of any failures of wood/fabric aerobatic wings.
Acro is fun, no doubt. However, it is hard to find an acro-capable airplane that is also useful for other things, like traveling, working on an IFR, etc. If we all had unlimited money, we could have an airplane for each use. Unfortunately, few of us are in that category.
Wood/fabric is the most successfully proven design for aerobatic wings. Why do you have reservations? I know of a whole lot more failures of metal aerobatic wings than wood/fabric. Actually, I don't know of any failures of wood/fabric aerobatic wings. There are good reasons serious aerobatic wings are either built of wood or carbon fiber.
SF-260 - a real traveling machine AND happy on it's back (or side, or vertical, etc.)
Sadly, I do not have the means to own one, though I do occasionally find the pennies to fly one.
Beech E or F-33C is the best 'hybrid' I know, the Piaggio/Fokke-Wolf 149 is pretty useful as well.
The RVs are great traveling machines. Our RV-8, with fore and aft luggage compartments, can carry almost as much cargo as my Cherokee did. We travel all over in it, and we do not feel limited.
Best of all, we are doing 170 knots on 8.5 GPH.
Poorly!How's that work out for putting in golf clubs, mountain bikes, and a 95lb dog?
Poorly!
Luckily, we don't need to carry any of those things.
My Nanchang is a nice traveling machine for two. Big baggage compartment, comfy cockpit and 148kts cruise on 13gph. On top of that it is a very nice aerobatic machine with light controls and a decent roll rate and very docile stall. Don
T-34 Beech are cool if you can afford one and you can live with a two seat tandem.
I guess they're putting IO-550's in them by now.... that would make one 'crispy.'