That's where I'm at now.GTS! (google that ****)
MMOPA.com, but it costs money to join.Any place like "beech talk" for piper aircraft?
Why don't you ask some questions here? Stipulate that anyone who answer your questions needs to either own one or fly one regularly. What do you want to know?
Piper supports the plane.
- Are parts easy to come by? (This will be for business use - not looking for some oddball that can't be fixed without calling a salvage yard)
- Are the parts super spendy (by aviation standards)?
The fundamental difference is whether you want a Continental powered Malibu or a Lycoming powered Malibu Mirage. Try to get hold of Kevin Meade, while he has sold his shop a couple of years ago, he still does consulting and pre-purchase evaluations.
- Any critical years to watch out for? (e.g. "old" V-Tails are -35-G35, "new" V-Tails are H35-V35)
People used to break engine mounts (it also carries the nosewheel). Piper upgraded it and iirc there is an AMOC for a beefed up structure.
- Anything that breaks more easily than others?
You are pulling a lot of power out of an engine in very thin air. Both Conti and Lycoming powered versions have had their share of cylinder problems.
- Any engine issues of concern? (e.g. the continental accessory otherwise known as a cylinder)
- What headaches does pressurization add to this model (e.g. a 58P is limited to 10000 hours)
- FIKI available? (I'm not knowingly going into ice unless I'm in the back of a jet with a drink in hand - so mostly looking for the option as an escape.)
The list goes on. I'll likely spend the $250 - was shocked as ABS is only about $100 and is pretty well known. I don't remember Cessna or the AYA group being very much either.
13 gph and 200kts?......I seriously doubt that. prolly more like 18-20 gph.I had a Columbia before the Malibu and spent more maintaining it than the Malibu. They are very quiet inside. Pressurization is very simple and although on mine I have to maintain at least 21 inches, that has never been a problem as I pretty much do full power descent. I usually burn about 13 gal at around 200kts true. Haven't found parts to be especially expensive. The pressure vessel is limited to 10000 hrs. The older ones have a better useful load. I think at slow speeds they fly like a warrior. They go fast very quickly however. I don't see need for speed brakes (which I don't have). Gear down is 170kts indicated as is first notch of flaps. Those take you to 120 kts in about a minute.
The P210 isn't out, but since I'm a Bonanza owner already, a TN'd 36 with boots (or TKS) would likely be more to my liking than a non pressurized 210. (Don't tell the other bonanza guys this, but a moony with a big engine has not been ruled out.) Regardless - I'll likely stick with a purchase that still has support from the factory.FIKI 210?
I'm a smallish guy - so I'll likely fit. But that is a good comment. I won't waste anyone's flight time for now, but I will definitely fly whatever I buy first. That is what sold the old V-Tail I fly now. I don't expect the elegance of the old -35 flight controls in a business transport, but the left seat has to "fit" if you are spending that many significant digits on a set of wings...Brian,
Before you send any money joining clubs, you need to set in the left seat of a Malibu. I was thinking of buying one until I tried to fit into the left seat. The seat was down and back as far as it could and my head was hitting the ceiling. The salesman said they could have the seat foam reduced but I did not want to travel 4 or 5 hours sitting on a hard seat. I cannot fit in that plane. End on my dream to own one of them.
Mmopa will give you a 30 day free trial if you ask the administrators. There is lots of info on them there. There are also several people that will be glad to tell you about them. If you are interested I can pass on some contacts. If you ar close to Tampa you can come and fly with me in mine. Mine also happens to be for sale as I am going to move up to a turbine pa46
The P210 isn't out, but since I'm a Bonanza owner already, a TN'd 36 with boots (or TKS) would likely be more to my liking than a non pressurized 210. (Don't tell the other bonanza guys this, but a moony with a big engine has not been ruled out.) Regardless - I'll likely stick with a purchase that still has support from the factory.
Brian,
I decided to keep my Toga and not upgrade.
If I win the lotto I plan on going with a Pilatus pc12
Yep. 13 gal at 200 true at cruise. Continental io550. Several people on this forum have flown or ridden in it if you need further confirmation. I flight plan for 15 with my climb to fl250. It's not advertised yet. Going thru the list of people who have expressed interest in the past. I don't want to be without a pa46 very long. Once you get used to pressurized flying it's hard to go long distances without. Oh on range, I flew from Nebraska to Tampa last trip which is 1080nm. Used 80 gal. Had at least 40 left and if I would have had The outboard fuel caps I would have had 60 left. I think the record ground speed on a Malibu is like 457kts Gs. Best I've done was maybe 290. Oh most pa46s are fiki by the way.
If I could swing a pc12 - I wouldn't have bothered posting here. That is one impressive airplane ... I'll forever slum it with a piston... wait ... lottery is tomorrow night isn't it !!!
Oh...no turbo? that does explain the low fuel burn....and lower HP at NA altitudes.Yep. 13 gal at 200 true at cruise. Continental io550. Several people on this forum have flown or ridden in it if you need further confirmation. I flight plan for 15 with my climb to fl250. It's not advertised yet. Going thru the list of people who have expressed interest in the past. I don't want to be without a pa46 very long. Once you get used to pressurized flying it's hard to go long distances without. Oh on range, I flew from Nebraska to Tampa last trip which is 1080nm. Used 80 gal. Had at least 40 left and if I would have had The outboard fuel caps I would have had 60 left. I think the record ground speed on a Malibu is like 457kts Gs. Best I've done was maybe 290. Oh most pa46s are fiki by the way.
Interesting. I see the jet prop bonanza conversations come up for sale from time to time. That would be cool! But a great way to make a flight plan look like a dotted line across the continent.If you like the PA46 airframe, the jetprop turbine conversion is one of the cheapest ways to get into a 260 knot turbine single.