What are these?
- Thread starter Kelvin
- Start date
- Joined
- Mar 10, 2013
- Messages
- 19,562
- Location
- Oakland, CA
- Display Name
Display name:
Bro do you even lift
thingamajiggies
You must have ESPN.
Tarheelpilot
Final Approach
- Joined
- Dec 5, 2010
- Messages
- 7,507
- Location
- North Carolina once again.
- Display Name
Display name:
Tarheelpilot
Hard to tell from the pictures you posted.
- Joined
- Mar 10, 2013
- Messages
- 19,562
- Location
- Oakland, CA
- Display Name
Display name:
Bro do you even lift
FTFY
luvflyin
Touchdown! Greaser!
Polar bears in a blizzard
luvflyin
Touchdown! Greaser!
Fill in the blank. @_______’s brains
- Joined
- Mar 10, 2013
- Messages
- 19,562
- Location
- Oakland, CA
- Display Name
Display name:
Bro do you even lift
eh I'm sticking with thingamajiggies until proven wrong.
Zeldman
Touchdown! Greaser!
Portable temporary coffins to be used when lots of folks die in a very short time.
(ok, I really don't know...)
(ok, I really don't know...)
Lindberg
Final Approach
As opposed to immobile, permanent coffins?
- Joined
- Apr 9, 2010
- Messages
- 1,190
- Display Name
Display name:
Llewtrah
Spent dilithium crystals. Stay away. Way away.
Zeldman
Touchdown! Greaser!
- Joined
- Dec 7, 2018
- Messages
- 1,343
- Location
- The Lone Star State
- Display Name
Display name:
Chrisgoesflying
I wouldn't worry about what these are, I would worry about what's hidden in between them ;-)
Matthew
Touchdown! Greaser!
Whatever they are, they don’t make them like that anymore.
GaryM
En-Route
- Joined
- Apr 16, 2020
- Messages
- 2,573
- Location
- Was KMMU, looking at KCOE
- Display Name
Display name:
Gary M
panels
- Joined
- Jul 21, 2014
- Messages
- 9,770
- Location
- Broken Arrow, OK
- Display Name
Display name:
SoonerAviator
Kind of look like industrial panels that you'd see on large commercial HVAC installations.
Another guess is some sort of portable building that those drop into a metal frame.
Another guess is some sort of portable building that those drop into a metal frame.
Lindberg
Final Approach
Ummm.....
I thought along the line of both of these ideas...there was some attachment hardware that I didn't get a picture of...
I think you are correct. They are filled with something or are solid...
LOL! Exactly!
Jim Schilling
Pre-takeoff checklist
It’s a kit plane. That’s all the skin panels for your very own DIY B-52!
Ok, I also have no idea what it is
Sent from my iPhone using Tapatalk
Ok, I also have no idea what it is
Sent from my iPhone using Tapatalk
Whatever they were, that's what they are now.
- Joined
- Mar 10, 2013
- Messages
- 19,562
- Location
- Oakland, CA
- Display Name
Display name:
Bro do you even lift
I was thinking data center floor panels but leaning more towards thingamajiggies. Metal ones.
- Joined
- Jun 13, 2008
- Messages
- 7,837
- Location
- Marietta, GA
- Display Name
Display name:
Drake the Outlaw
I was going with floor panels.
- Joined
- Mar 2, 2005
- Messages
- 15,263
- Location
- Southeast Tennessee
- Display Name
Display name:
This page intentionally left blank
Home battleship kit!
Jim Schilling
Pre-takeoff checklist
- Joined
- Jun 7, 2008
- Messages
- 23,964
- Display Name
Display name:
Bob Noel
on the way to Homer?
- Joined
- Jul 21, 2014
- Messages
- 9,770
- Location
- Broken Arrow, OK
- Display Name
Display name:
SoonerAviator
They appear that they might have insulation in them, which would be a bit odd for floor panels, but not impossible.
Battery plates for Boeing’s new electric 777.
This is the other side...does this change your opinion?
The property owner has NO idea what they are..they have been siting on the property since 2017...
Attachments
Checkout_my_Six
Touchdown! Greaser!
They look like a raise floor tiles....computer rooms use to have those back in the 70's.
Those my friend, are one of life's mysteries!
I remember my dad used to come across "deals" for stuff like this all the time..... loads of all sorts of unknown things.....
He's say, I could come up with something to make out of these. They'll be great.
Occasionally he would come up with some creative use for them. More often though they'd end up sitting in the way just like these are for years and he'd end up either selling to some other innovative person, or more likely selling them for scrap.
....never knowing what they were really intended to be.
I remember my dad used to come across "deals" for stuff like this all the time..... loads of all sorts of unknown things.....
He's say, I could come up with something to make out of these. They'll be great.
Occasionally he would come up with some creative use for them. More often though they'd end up sitting in the way just like these are for years and he'd end up either selling to some other innovative person, or more likely selling them for scrap.
....never knowing what they were really intended to be.
That's where I have been leaning...I'd suspect that there would be suspension/frame hardware nearby but there isn't any....who knows.
These are on a piece of industrial property I am considering buying...all I see is the cost of disposal...if they could be scrapped, that'd be great...that might put us in a position to actually dispose of them without writing a check...THAT would be fabulous!
Checkout_my_Six
Touchdown! Greaser!
cut one open and be sure there isn't asbestos inside. If not it's steel scrap.
Look for the rails and pylons....they sit inside a track.
Look for the rails and pylons....they sit inside a track.
Timbeck2
Final Approach
The raised on looks like a concrete mold for fake cobblestone
DaleB
Final Approach
No, that quite confirms my opinion. Those are absolutely raised floor tiles. No question whatsoever.
Right on! Do you have any idea what material the 'underside' is made of?