Not as dramatic as the YouTube header would like one to believe, but still an interesting video of this United 767 touch and go Zürich.
Looks like no spoilers on the first landing?
Looks like no spoilers on the first landing?
There are many reasons they might not deploy even if armed. Looking at the main gear touchdowns (multiple) and possible power settings they might not have meet deployment criteria. It’s also worth noting that for at least the first 15 years of 767 flying it was not required to even arm them. In fact we never armed them at my airline unless the runway was shorter than 8000 feet as they would ruin a great landing. If unarmed they will deploy on reverse thrust selection. We manually deployed them by easing them out. Made for really great landings. The 767 is an absolute sweetheart to land. You really have to work at it to screw it up this bad.The spoilers deploy automatically if the system was armed. They might have missed a step in the checklist. But I doubt that it would have had any affect on the PIO.
I’d hate to have been in that cockpit. The go-around was executed waaaay later than it should have. As soon as that PIO started the PF should have gone around and the PM should have called it if not. That was seriously sloppy. The pax had to love it.Not as dramatic as the YouTube header would like one to believe, but still an interesting video of this United 767 touch and go Zürich.
Looks like no spoilers on the first landing?
It appeared the “pogoing” had resolved. Realize they shouldn’t have been in a PIO situation in the first place, but after bounce settled, did they even need to go around?I’d hate to have been in that cockpit. The go-around was executed waaaay later than it should have. As soon as that PIO started the PF should have gone around and the PM should have called it if not. That was seriously sloppy. The pax had to love it.
The EMAS was getting larger by the second.It appeared the “pogoing” had resolved. Realize they shouldn’t have been in a PIO situation in the first place, but after bounce settled, did they even need to go around?
(To state what’s likely obvious, I’m a piston guy, no turbine experience)