Somebody forgot the gear lever!

40YearDream

40YearDream

Pre-takeoff checklist
Joined
Jan 23, 2020
Messages
262
Location
Grand Rapids, MI
Display Name
Display name:
40YearDream
Saw this today during a bathroom stop in the midst of my long cross-country:
upload_2020-9-5_20-31-10.jpeg
upload_2020-9-5_20-31-23.jpeg
The bottom of the hull did not appear beaten up / damaged - maybe he/she pulled up as soon as he heard the props making loud noises, and managed to do a go-around with some 'customized' propeller blades?
 
So may just departed dad along with with a friend in the 1960 forgot your do that with an brand new Barron. It actually caught on fire and burned. Jack on the way out of the plane pulled the lever down. I have seen damage like this from a ground retraction. Bonanza driver got confused on the flap and gear


Sent from my iPhone using Tapatalk
 
Omalley1537 said:
wasn’t that the one where the pilot flew to another airport, and was in the process of swapping props to sell it when the FAA got wind of his shenanigans?
Click to expand...

Not sure of the backstory, but it seemed apropos to the thread. Guess some people have survived the feat in the wild! :D
 
hindsight2020 said:
Not sure of the backstory, but it seemed apropos to the thread. Guess some people have survived the feat in the wild! :D
Click to expand...

True...and the phrase “you just became a test pilot” that’s often used here is definitely applicable...
 
I guess that's one way to deal with the propeller blade tip vortices...:rolleyes:
 
A plane from MI landed gear up at our airport 6+ weeks ago, seemed like a fuel stop. The plane sits now with the prop off, I think the owner/insurance is deciding what to do. I don’t have the heart to even take a picture of it.
 
sourdough44 said:
A plane from MI landed gear up at our airport 6+ weeks ago, seemed like a fuel stop. The plane sits now with the prop off, I think the owner/insurance is deciding what to do. I don’t have the heart to even take a picture of it.
Click to expand...

The problem these days is the hull values of many of our older, aging airplanes are less than the cost of the prop/engine/airframe work after a gear up.

Couple of friends of mine lost their 250 Comanche that way two years ago. Did everything correctly after not being able to get three greens. But it had a three blade prop so impossible to avoid the strike. Although the damage to the airframe looked pretty minimal the insurance company didn't hesitate to write it off and pay out on their hull coverage. It was sad to see that airplane leave the airport on a truck, with its wings clipped, a few days later.
 
Forgot to do his GMPS check?
 
Omalley1537 said:
wasn’t that the one where the pilot flew to another airport, and was in the process of swapping props to sell it when the FAA got wind of his shenanigans?
Click to expand...
Yeah, something like that. There is no NTSB report, that's for sure.
 
It now features Q tip props
 
edslau33 said:
Bonanza driver got confused on the flap and gear
Click to expand...
Yeah that big yoke bar with the flap and gear hidden (along with every other switch, requiring finger gymnastics) has bitten people!
 
Tantalum said:
Yeah that big yoke bar with the flap and gear hidden (along with every other switch, requiring finger gymnastics) has bitten people!
Click to expand...

*gasps* I'd never.... How dare you challenge ancestor worship, dear sir! :D TC
 
Tantalum said:
Yeah that big yoke bar with the flap and gear hidden (along with every other switch, requiring finger gymnastics) has bitten people!
Click to expand...
That and on the early ones they're non-descript piano keys. At least the Navion (owing to NA's big boy heritage) made the gear shaped like a wheel and the flap shaped like a flap.
 
Lot of this going on. There was a recent gear up on a twin at KSNS Salinas, CA. Guy forgot the gear switch. :7(
 
Last edited:
You must log in or register to reply here.
Back
Top