Reflective tape for Prop balancing

I think the 1" wide tape should work very well if you follow the size and placement guidelines in the instructions.
 
21541803 said:
Any suggestions on the type or brand of tape to be used with the Dynavibe Classic setup?
Click to expand...
3M 7610. This is the only tape I've used with any balance gear (chadwick, aces, dynavib etc.) Its pricey but is a high gain tape made just for photo sensors that require retro-reflectivity. Not all tapes reflect back to the source which can throw off the internal calculations of the balancer.
 
Bell206 said:
3M 7610. This is the only tape I've used with any balance gear (chadwick, aces, dynavib etc.) Its pricey but is a high gain tape made just for photo sensors that require retro-reflectivity. Not all tapes reflect back to the source which can throw off the internal calculations of the balancer.
Click to expand...

Thanks for the feedback Kenny and Bell206
I found this vendor.
https://www.identi-tape.com/high-gain-sheeting.html
7610 good enough? Always the choices that is making it difficult :)
 
You must log in or register to reply here.
Back
Top