Tantalum
Final Approach
- Joined
- Feb 22, 2017
- Messages
- 9,250
- Display Name
Display name:
San_Diego_Pilot
I'd be curious for a source on that too. I'm always worried about "word of mouth" and salty old CFIs who embellish figures to put down a modern piece of tech in the name of tradition. According to Austro's fact sheet https://austroengine.at/uploads/pdf/mod_products9/AE330FactSheet.pdf the engine is 1,800 hr TBO and is about $30/hr to operate.. so $60/hr in the twin (actually they say $23 Euro/hr so mine are liberal estimates). There are plenty of people who fly behind the big Conti's and need serious work on them well before they reach 1K hr, or at least well before TBO. Sure, it's people running them hot, or pushing them hard. But in the Austro engines it's all fadec, mixture, prop, etc.But it requires a $20,000 “service” every 600 hours
It's amazing.. and in the case of the DA62 it'll over 190 knots at 12 gph, total.. or about 170 at 10 gph around 16K.. if you talk to owners. These figures were reserved for Moonies, but in the DA62 instead of being squeezed into a puny 60 year old cockpit with one door you're in a large 7 seat plane festooned in luxury and you get both AC and TKS! (sorry I couldn't avoid throwing in a gratuitous Mooney dig)140KIAS at ~6 gallons/hour (in an admittedly slick airframe)
Same.. I talked to a guy at MYF a few months ago who'd flown his from Long Beach to Japan and back, via Alaska.. he hadn't had any issues with the plane in about 300 hrs of ownership.Fair enough. I've always been curious what the actual ownership costs of those engines is.
I know the early diesels had low TBO and high ops cost, but I think in the last 10-15 years there's been a lot of refinement
anyway, as cool of a plane it is I think it prices itself out of the market. People who want to burn JET A and spend well in excess of $1M are probably going to be looking at true turbines. You enter used TBM territory at the price point.