red4golf
Line Up and Wait
I sent an email to see if I could tour their facility and learn a little more but haven't heard back. I'll be pretty busy but will try to visit with them after the first of the year.
Portapilot - Portable autopilot?
- Thread starter MarkH
- Start date
I sent an email to see if I could tour their facility and learn a little more but haven't heard back. I'll be pretty busy but will try to visit with them after the first of the year.
- Joined
- Oct 16, 2019
- Messages
- 6,166
- Location
- Atlanta / Marietta
- Display Name
Display name:
Vintage Snazzy (so my adult children say)
In the spirit of experiemental autopilots, this looks interesting. Attaches to your elevator and aleron trim tabs with tape. (Yes, double stick tape). The things you stick on your plane are RC servos, run by your I pad. Now, what could possibly go wrong....
MauleSkinner
Touchdown! Greaser!
Paul V
Pre-takeoff checklist
Every time I see this thread I think about this:
My thoughts as well. Is it really called that? Worst name ever.
- Joined
- Jul 23, 2021
- Messages
- 3,888
- Display Name
Display name:
Albany Tom
We would make fun of guys who would use double sided tape to mount RC servos in foamy RC planes. But I know, the wonders of modern adhesives, etc.
Do they stick them on the paint, or is there some sort of procedure to get to bare aluminum and prep that first. Because otherwise, your servos aren't attached with the strength of double sided tape, they're stuck on with the weakest of either the tape, or whatever the adhesion of the paint is.
Do they stick them on the paint, or is there some sort of procedure to get to bare aluminum and prep that first. Because otherwise, your servos aren't attached with the strength of double sided tape, they're stuck on with the weakest of either the tape, or whatever the adhesion of the paint is.
- Joined
- Oct 16, 2019
- Messages
- 6,166
- Location
- Atlanta / Marietta
- Display Name
Display name:
Vintage Snazzy (so my adult children say)
Excellent point. They didn’t go that far.
hindsight2020
Final Approach
- Joined
- Apr 3, 2010
- Messages
- 6,999
- Display Name
Display name:
hindsight2020
well, experimental AP solutions might be deserving of mockery.... in the same way fac-built $$$olutions deserve contempt from where I sit; so I guess we'll call it even.
The "double sided tape" side of the hobby may be "crazy", but it tends to be less snooty. Certainly less passive aggressive about low-key treating certified price points as a feature and not a bug. But I'll digress here in the interest of not derailing the necro.
The "double sided tape" side of the hobby may be "crazy", but it tends to be less snooty. Certainly less passive aggressive about low-key treating certified price points as a feature and not a bug. But I'll digress here in the interest of not derailing the necro.
- Joined
- Oct 16, 2019
- Messages
- 6,166
- Location
- Atlanta / Marietta
- Display Name
Display name:
Vintage Snazzy (so my adult children say)
I applaud innovation and wish many of the proven experimental solutions were allowed on the certified aircraft without all of the expensive model specific certification.
But radio controlled servos exposed outside the aircraft on critical control surfaces driven by an I Pad is in my “not a good idea” category. Attached by self sticking adhesive is the cherry on top.
But radio controlled servos exposed outside the aircraft on critical control surfaces driven by an I Pad is in my “not a good idea” category. Attached by self sticking adhesive is the cherry on top.
Has anyone actually seen one of these things in the wild? Does anyone have any info on it? I have an older 210 and I know it’s “right” for it- all I want is something to take the “edge” off flying in level flight. It’s soooo annoying to have to kinda fly it all the time. But it’s not worth spending 25k for anything out there on the market. It’s such a crappy spot to be in