Day off craft projects

GrummanBear

Ejection Handle Pulled
Joined
Jan 28, 2020
Messages
225
Display Name

Display name:
X
C7B915F8-EFAE-42D9-8340-1AA700404C7E.jpeg
B527DFAB-7C65-4601-9E95-AD33280CA5A0.jpeg
B9E78127-F06E-4053-8217-5D56792A098B.jpeg D69FD331-A7D4-4239-BF89-817A7F1F4F83.jpeg
We are slammed with work these days, but needed some time for some brews and shelter-in-air conditioning.

Hate having loose items in my cockpit. Slid off the cockpit sun visors and set these up. PIC side on the drop down is cruise/range data, checklists, and critical V speeds. Back side is magnetic dry erase board for jotting info. The magnetic clip is to hold cards with enroute freqs on cross countries.

Bought a small magnetic dry erase board for 5.99, tore off the edges, used a butcher knife to slide the primary surface from the cardboard backing. Traced then cut the board with scissors. Everything was mounted with double sided tape, with edges lined with black electrical tape - holds secure, but can be changed or repaired easily.

SIC drop down is my fam and meme, back side is emergency procedures.

I dig it, useful for klutzes like myself who otherwise drop things between the seats. Total cost, about $15, two hours
 
Last edited:
Back
Top