Coleson Bruce
Filing Flight Plan
- Joined
- Nov 15, 2021
- Messages
- 7
- Display Name
Display name:
cvalue13
Hello forum,
I am an interloper to the topics of early aviation, coming instead to the forum as a collector of early pilot’s chronograph watches. I’ve come seeking your expertise, specifically about some “mystery” design features of early pilot’s chronographs.
THE “STANDARD” CHRONOGRAPH:
A “standard” chronograph watch typically includes a minute register (or minute “totalizer”) that displays 30 or sometimes 45 minutes maximum; on these “standard” minute totalizers, there are also typically dial markings that emphasizie increments of 5 minutes (i.e., a standard 30 minute chronograph register may have dash marks for each minute, but then additionally display the numerals at minutes 5, 10, 15, 20, 25 and 30).
THE PILOT DESIGN FEATURES:
Between (roughly) the 1920s and into the late 1960s, chronograph wristwatches were marketed toward and utilized by pilots for innumerable purported utilities in the cockpit, I would imagine.
Some chronographs of the period marketed towards pilots or designed on spec for military aeronautics would alter the “standard” approach to the minute totalizer design. Rather than being designed to “emphasize” 5 minute increments, they instead emphasize 3 minute increments. So, rather than containing numerals and emphasis at the 5 minute marks, there would instead on these chronographs seemingly geared towards pilots be emphasis placed on the 3 minute marks.
Were this “emphasis” of showing 3 rather than 5 minute intervals all, it might be written off as mere design happenstance. But, many such chronograph manufacturers went even further in this apparent emphasis on the 3 minute increments. For just some examples:
-> some manufacturers altered the dial design to enlarge the minute register for even greater legibility of these 3-minute demarcations, creating so-called “big eye” chronographs (a name due to the asymmetrically enlarged minute register featuring prominently on the dial)
-> they or other manufacturers may also go so far as to alter the mechanical function of the watch to have not a 30 minute register, but instead a 15 minute register (with 3-minute markings), which 15 minute register again appearing to be intended to make more legible these three minute intervals
-> they or others may also make the “hand” and 3-minute marks of the minute register contain luminous material, again to further increase the legibility of these 3-minute demarcations (whereas other “standard” chronographs rarely made luminous the minute register)
When all these design decisions were combined in one watch (sometimes), and marketed towards pilots (or created for military flying applications), it causes one to believe that pilots may have had some particular reason to “need” to easily see 3 minute increments when running their chronograph. (Or, at least, that watch manufacturers believed this to be useful enough for pilots that they altered their dial designs and even the movements themselves).
THE “MYSTERY”
I have not come to the forum completely empty handed of research on this. I do have some theories. But, I don’t want to share them prematurely and then potentially bias any responses (for now) - except to say my research has pointed me towards reasons having to do with navigation calculations.
I hoped the pilots or historical aeronautics buffs here in this forum might do me the wonderful favor of attempting to help with the “mystery” around the probable utility of these early and mid-20th century pilot’s watches that emphasize 3-minute intervals of time.
Put more simply: why might early and mid-20th century pilots have valued a wrist chronograph that made clear(er) to read the elapsed 3-minute time interval? (Any period photo/writing evidence is ultimately where I’m headed.)
A “THANK YOU”
A long first post, only to ask for help, for which I apologized and thank you for your patience.
I’ll also and meanwhile be digging around the forum for accidental answers!
I am an interloper to the topics of early aviation, coming instead to the forum as a collector of early pilot’s chronograph watches. I’ve come seeking your expertise, specifically about some “mystery” design features of early pilot’s chronographs.
THE “STANDARD” CHRONOGRAPH:
A “standard” chronograph watch typically includes a minute register (or minute “totalizer”) that displays 30 or sometimes 45 minutes maximum; on these “standard” minute totalizers, there are also typically dial markings that emphasizie increments of 5 minutes (i.e., a standard 30 minute chronograph register may have dash marks for each minute, but then additionally display the numerals at minutes 5, 10, 15, 20, 25 and 30).
THE PILOT DESIGN FEATURES:
Between (roughly) the 1920s and into the late 1960s, chronograph wristwatches were marketed toward and utilized by pilots for innumerable purported utilities in the cockpit, I would imagine.
Some chronographs of the period marketed towards pilots or designed on spec for military aeronautics would alter the “standard” approach to the minute totalizer design. Rather than being designed to “emphasize” 5 minute increments, they instead emphasize 3 minute increments. So, rather than containing numerals and emphasis at the 5 minute marks, there would instead on these chronographs seemingly geared towards pilots be emphasis placed on the 3 minute marks.
Were this “emphasis” of showing 3 rather than 5 minute intervals all, it might be written off as mere design happenstance. But, many such chronograph manufacturers went even further in this apparent emphasis on the 3 minute increments. For just some examples:
-> some manufacturers altered the dial design to enlarge the minute register for even greater legibility of these 3-minute demarcations, creating so-called “big eye” chronographs (a name due to the asymmetrically enlarged minute register featuring prominently on the dial)
-> they or other manufacturers may also go so far as to alter the mechanical function of the watch to have not a 30 minute register, but instead a 15 minute register (with 3-minute markings), which 15 minute register again appearing to be intended to make more legible these three minute intervals
-> they or others may also make the “hand” and 3-minute marks of the minute register contain luminous material, again to further increase the legibility of these 3-minute demarcations (whereas other “standard” chronographs rarely made luminous the minute register)
When all these design decisions were combined in one watch (sometimes), and marketed towards pilots (or created for military flying applications), it causes one to believe that pilots may have had some particular reason to “need” to easily see 3 minute increments when running their chronograph. (Or, at least, that watch manufacturers believed this to be useful enough for pilots that they altered their dial designs and even the movements themselves).
THE “MYSTERY”
I have not come to the forum completely empty handed of research on this. I do have some theories. But, I don’t want to share them prematurely and then potentially bias any responses (for now) - except to say my research has pointed me towards reasons having to do with navigation calculations.
I hoped the pilots or historical aeronautics buffs here in this forum might do me the wonderful favor of attempting to help with the “mystery” around the probable utility of these early and mid-20th century pilot’s watches that emphasize 3-minute intervals of time.
Put more simply: why might early and mid-20th century pilots have valued a wrist chronograph that made clear(er) to read the elapsed 3-minute time interval? (Any period photo/writing evidence is ultimately where I’m headed.)
A “THANK YOU”
A long first post, only to ask for help, for which I apologized and thank you for your patience.
I’ll also and meanwhile be digging around the forum for accidental answers!