3 in the green
Line Up and Wait
Getting all of my ducks in a row and looking to pull the trigger at some point in the next few months...
Mission is maybe 60% local flights around Socal, 20% trips within 150-200nm, and 20% flights up to BC/WA (~900 nm) and even farther into BC - family is there and we share a cabin there as well. IFR rating will be had this year, I currently don't have but am about halfway there.
Payload requirements are me (180), and two growing boys (11 and 8) - while younger and lighter now, that will change rapidly in the next few years especially with my oldest.
Acquisition budget is around 50K, maybe 60k depending, can support maintenance to a certain degree but nothing too crazy. Not a hard and fast requirement as I'd be willing to do some panel upgrades over time, but I'd love it were IFR-capable.
Suggestions?
Been looking at:
172 (incl. 180 hp conversions)
177
170 (love me some tailwheel)
182 (harder to find in this budget range; straight tail worth it?)
early Bo (scared of the maintenance)
Mooney M20 series
Comanche (dream...but the maintenance?)
Tiger?
Not a requirement for my machine, but nice to have: family cabin area has a 2k' long narrow dirt/grass strip, relatively level, at 3k' MSL in central BC. Family has an O-300 172D and I've used that there and get in and out without problems so long as you watch DA and weight as with anything. Alternatively there's a full service published public airport within a 45 min drive.
Mission is maybe 60% local flights around Socal, 20% trips within 150-200nm, and 20% flights up to BC/WA (~900 nm) and even farther into BC - family is there and we share a cabin there as well. IFR rating will be had this year, I currently don't have but am about halfway there.
Payload requirements are me (180), and two growing boys (11 and 8) - while younger and lighter now, that will change rapidly in the next few years especially with my oldest.
Acquisition budget is around 50K, maybe 60k depending, can support maintenance to a certain degree but nothing too crazy. Not a hard and fast requirement as I'd be willing to do some panel upgrades over time, but I'd love it were IFR-capable.
Suggestions?
Been looking at:
172 (incl. 180 hp conversions)
177
170 (love me some tailwheel)
182 (harder to find in this budget range; straight tail worth it?)
early Bo (scared of the maintenance)
Mooney M20 series
Comanche (dream...but the maintenance?)
Tiger?
Not a requirement for my machine, but nice to have: family cabin area has a 2k' long narrow dirt/grass strip, relatively level, at 3k' MSL in central BC. Family has an O-300 172D and I've used that there and get in and out without problems so long as you watch DA and weight as with anything. Alternatively there's a full service published public airport within a 45 min drive.