piper warrior

Hi Guys! It's been an age since I last posted in here. I've become a PPL since my last post! I figured I'd come back over and start things off with my latest video. If you're a fan of Noel Philips from the UK, check it out! We fly around Florida checking out some of the hotspots, including the...

Hey guys - having an issue. Currently my piper warrior seems to like hot temperatures. It has been dwidling around 240 - every close to red line. It was running 20W50 just changed it to W100 plus engine oil but little improvement. This is an O-320-D3G has about 1100 hrs. Let me know what you...

Selling used interior plastics from Piper Warrior 1984. Click on link for more info http://rover.ebay.com/rover/1/711-53200-19255-0/1?icep_ff3=2&pub=5575378759&campid=5338273189&customid=&icep_item=184100529144&ipn=psmain&icep_vectorid=229466&kwid=902099&mtid=824&kw=lg&toolid=11111

Hey guys - I've been trying to figure out how to effectively record cockpit radio - I've used a splitter but no matter how much I lower or increase the volume in cockpit the audio redlines in the gopro. Has anyone else come across this issue? Not going to buy a dedicated recorder with an...

Any words of advice, tips issues with EDM 700. Figured EDM 700 would be a good investment for future maintenance issues. Whats a good rate for labor (installation)? Parts? Ideally Im trying to get CHT/EGT for each cylinder and fuel flow is there any specific parts/probes that are required...

This may not be of any major concern- but under low RPM - hearing a slight metal shimmy sound (hard to describe.. maybe if you rub 2 metal cymbals and rub them together sound?) does that seem normal? Or has anyone else experienced this? Lycoming engine. (Engine oil lvl is good, no metal found...

Have a attitude indicator that wobbles on startup - takes about 15 - 20 mins to level out. Vacuum looks great - any other solutions but overhauling the instrument. If I have to overhaul it - know any place that’s NOT going to cost 1000+ In South Florida?

In Florida with the lousy weather - hinges being bent or control rods moved out of place to rub adjacent metal surface. This could've happened due to strong winds flapping the control surfaces. Does anyone have any experience with insurance covering damages caused due to wind flapping the...

Recently purchased an aircraft - and I fly it regularly. I wanted to know why flightradar24 would show previous owners flight path and not mine. I made sure Uavionix (Skybeacon TSO) is powered and functional during take off. I also ran a FAA ADSB progress report to make sure no errors were...

I went to look at a Piper Warrior II last week. If you’re going to fly a lot — the tipping point seems to be about 100 hours per year — it makes more financial sense to buy a plane rather than continue to rent. There was a group at my local airport looking for a partner in their 1979 Warrior...

Laser engraved on a beautiful 8"x10" piece of finished maple, this plaque is sure to please the Warrior pilot in your life! Makes a great fathers day gift, solo flight commemoration, passing of a checkride, or simply "just because" it looks so darn good! Cost is $49.99 each, with an additional...

Hey guys, Last week, I pre-flighted my piper fine and lined up for take off. I gently added full power. The RPM was set to 2500 and did not move above that. Airspeed was alive and at 60, I rotated. After few minutes at full throttle still, RPM moved to 2550. In the past, all the time I have...