Search results

Not overstated if your displays turn black.

Not much but some boating sites have it. Pueblo Reservoir last I know did.

Must be a new site: Colorado and Wyoming are 'under development'

Trusted my fuel flow gauge too much once. Dead sticked to the airport.

Probably not since the city took over the airport

This was the first season. Big controversy. Most folks thought Hugh could be renovated and was different setting than on-campus plus parking and tailgating. But the athletic director and the president sold the idea that we could have a world class team if they had a stadium on campus. Never...

'Some fly at 9078 We land -- Telluride

Colorado State has a under grad and grad good program. One of the best in exotics. And it's not a bad place to live. I look out my window at Long's Peak and the Continental Divide.

Nasty Found this after landing awhile back

Mayo isn't as bad. https://www.mayoclinic.org/diseases-conditions/heart-attack/symptoms-causes/syc-20373106

Circled once for 15 minutes trying to raise the tower at San Angelo, TX KSJT. Guy finally answer, apologized and said he was alone and had to go down the hall.

Yep, lots more info needed. How close to the ground, can you see the extent of the event, and more. I used to fight a mountain wave and after awhile realized I was just spending more time in to. Probably doesn't apply as well to a burst.

Get out of it as fast as you can, Va 90 degrees to the wind

I hope it helps. They aren't doing the crosswind 6/24 yet and it won't be mandatory for at least a year. It's from a local newspaper and I'm not a subscriber. Agree very bad page. It was a better update than the official page.

Soon you can deal with this too: http://www.reporterherald.com/news/loveland-local-news/ci_32247839/remote-tower-project-loveland-northern-colorado-regional-airport

Examiner: How far are we from that cloud. Answer: Better than 500'

I found the set screws at ACE

Both typing at the same time. Good diagram

Why wouldn't the distances be curves around all edges not square?

The EGT sensor and wire connecting to the display could be the problem. Switching wire from another cylinder would check this