JOhnH
Touchdown! Greaser!
I wasn't sure where to put this. I have another thread on this topic but I didn't want anyone interested to have to wade through all the speculation and bad advice.
This works!
If you have bluetooth enabled hearing aids (or cochlear implant) and you have a "MiniMIc" you can stream directly from your audio panel to your hearing device.
The only other thing you need is this $4 device:
All you have to do is plug this adapter into 1/4 inch headphone jack instead of the plug from your headset. Plug in the "transmit" plug so you can talk.
Plug your 3.5 mm cable from the MiniMIc into the adapter and turn it on (and do whatever your device requires to activate the external audio source).
You will probably also need to plug the power cord into the minimic. Mine is a USB to MicroUSB cord.
I haven't had "normal" hearing in years, but I think this is even better than normal hearing. It adds an extra layer of noise reduction because it doesn't pick up all the ambient noise. Only the digital audio is transmitted.
You still need to have a headset that covers the behind-the-ear piece of your hearing aid. My LIghtspeed DZ works great.
One last note: When I had my Cochlear implant done I took my headset in so the surgeon could mark where to place the magnet so it didn't interfere with the ear muff.
I hope this helps somebody else.
If you have any questions, feel free to ask her or PM me.
edit: I need to clear something up. I HOPE I haven't jumped the gun in my excited rush to post this. I guess for most of you this is irrelevant, but to people like me, it is highly relevant and exciting. I went to the hangar, turned on the com devices and tested this on the ground, but I only tested the ability to hear, and to see if the adapter would work. I did not test what happens if I actually try to transmit. Will there be feedback if I try to talk while the mini mic is doing the audio receiving? I can't honestly say yet. I'll try again this weekend on an actual flight.
This works!
If you have bluetooth enabled hearing aids (or cochlear implant) and you have a "MiniMIc" you can stream directly from your audio panel to your hearing device.
The only other thing you need is this $4 device:
All you have to do is plug this adapter into 1/4 inch headphone jack instead of the plug from your headset. Plug in the "transmit" plug so you can talk.
Plug your 3.5 mm cable from the MiniMIc into the adapter and turn it on (and do whatever your device requires to activate the external audio source).
You will probably also need to plug the power cord into the minimic. Mine is a USB to MicroUSB cord.
I haven't had "normal" hearing in years, but I think this is even better than normal hearing. It adds an extra layer of noise reduction because it doesn't pick up all the ambient noise. Only the digital audio is transmitted.
You still need to have a headset that covers the behind-the-ear piece of your hearing aid. My LIghtspeed DZ works great.
One last note: When I had my Cochlear implant done I took my headset in so the surgeon could mark where to place the magnet so it didn't interfere with the ear muff.
I hope this helps somebody else.
If you have any questions, feel free to ask her or PM me.
edit: I need to clear something up. I HOPE I haven't jumped the gun in my excited rush to post this. I guess for most of you this is irrelevant, but to people like me, it is highly relevant and exciting. I went to the hangar, turned on the com devices and tested this on the ground, but I only tested the ability to hear, and to see if the adapter would work. I did not test what happens if I actually try to transmit. Will there be feedback if I try to talk while the mini mic is doing the audio receiving? I can't honestly say yet. I'll try again this weekend on an actual flight.
Last edited: