So, student pilots.. Who are we and where do we stand?

....and we had a disappointing day today. After about an hour of flight, the ABS CFI and I landed (very smoothly) at KENW. We got taxi instructions, rolled back up to the hold short line, and paused to re-load the flight plan and check everything before heading back to home base. Tower clears us to take off and we start to roll onto the runway....

.....and the plane didn't want to roll. We got about 20 feet past the hold line and scrubbed the takeoff.

Uh-oh.

Long story short, somehere during the taxi-back we must have rolled over something sharp, because the nose gear tire was dead flat. Fun. 2 hour Uber ride back to KETB got us back where we started, but without an airplane.

Welcome to aircraft ownership, I guess.
 
Last edited:
StraightnLevel said:
Welcome.to aircraft ownership, I guess.
Click to expand...

C’est la GA.

I found a bad exhaust valve last week. While the cylinder was off I found corrosion and pitting on the cam lobes. Now I’m looking into an engine OH.

Grumblegrumble.......
 
Half Fast said:
C’est la GA.

I found a bad exhaust valve last week. While the cylinder was off I found corrosion and pitting on the cam lobes. Now I’m looking into an engine OH.

Grumblegrumble.......
Click to expand...

I really hate to hear that but sometimes bad things happen to good people ...
 
Half Fast said:
In the long run it’ll be a good thing. A fresh motor that I can trust.
Click to expand...

Got a friend in Tennessee that had a similar experience when he noticed something strange with EGT on one cylinder. A&P pulled a jug and found a cam lobe was wiped. He's almost done spending money and about ready to fly the thing again. But, as you say, he now has an engine that he can have confidence in ...
 
Daleandee said:
But, as you say, he now has an engine that he can have confidence in ...
Click to expand...
Well, after the first 200 hours perhaps! I just had an engine overhaul and did a coast-to-coast after about ten hours of local hard flying for break-in. I have never been more suspicious of an airplane engine than I am of mine right now, even though its running flawlessly. If something is going to break or declare that it wasn't installed correctly, now is the time.

Happily, I installed a GI-275 engine monitor in the meantime. I have never been so happy to have hard data as I was when I started imagining weird engine sounds while working my way through the mountains! Those little green bars kept my blood pressure in check!
 
You must log in or register to reply here.
Back
Top