Bryan Herter
Filing Flight Plan
- Joined
- Nov 3, 2019
- Messages
- 6
- Display Name
Display name:
Bryan Herter
Help, Just can't find them anywhere. Installed an Aspen E5 and have it interfaced to the S-TEC 50 but need to configure the Roll board for the KCS-55 to be compatible with the Aspen ACU. It had a GPSS 901 and was configured for it, I have the Drawing 0508 that tells me that for the ST-901 remove R6, change R26, R15 and R5 to 43.2K, and for the KCS/55A to just remove R6 (jumper is supposed to be set to pins 2 and 3 for both the 901 and the KCS55A). Unfortunately it doesn't tell me what value resistors were in it originally for R26, R15 and R5 and those values are apparently the values that need to be in place for the KCS/55A configuration along with the R6 removal and jumper 2 and 3. As it is with the 901 configuration it just rolls right. I can't find the document with the resistor matrix that it needs to be for the KCS/55A. Does anyone have access to the original resistor values, or know the definite values needed for the KCS/55A configuration?
Thanks,
Bryan
Thanks,
Bryan