Magman's latest activity

Insufficient info.

I hope no one took my post as encouragement to do DIY with controls. USAF also has/had a system with a “ Red X” that only certain folks...

Cherokees and Cessnas are fairly easy to rig and most experienced Techs can do the tasks. However; even the best will need the...

The pic shows usage of the simple fixture used to check for proper wing twist or “ wash-out” per Cessna SM. Easily made and used but...

It’s possible that newer Cessna manuals may provide allowable wear dimensions. If so , even .010 may be allowable. With current cost of...

If Damper ;suggest you match bushing to aircraft rather than ream to match Bushing. The hole will be elongated. Match bushing to that...

It looks similar to a Cessna Shimmy Damper Bushing. The oversize is quite a jump!

There are also folks on there that passed 70 years ago!

4 attach “ cylinder” to lower spar cap. There are 6 others though. Measuring the hole indicated that 3 first oversize bolts were...

My suggest has always been to follow the instructions of whomever is warrantying the cylinders. Do ALL cockpit items such as trim...

Kev. I didn’t realize #10 was yours. So you question is if the Current Annual was signed by a legitimate IA? As was said; the FSDO...

Looks like OP never got back with a reason.

And? You implied in your post the FAA annual record form didn’t exist. I merely enlightened you that it did and gave you some background...

After dealing with loose gear bolts for many years my thought is to document my beliefs.I do not think it conflicts with any mandatory...

That was actually a rather broad statement on my part. If you are going to paint assure you follow recommended procedure . I’ve never...